Admiral AGD4475TQ1 7.0 cu ft Gas Dryer with Moisture Sensor and Wrinkle Guard Yellow Flame Error Fix: Burner Flame Is Yellow or Orange Instead of Blue

Error code Yellow Flame on the Admiral AGD4475TQ1 7.0 cu ft Gas Dryer with Moisture Sensor and Wrinkle Guard means: Burner Flame Is Yellow or Orange Instead of Blue. A healthy gas dryer flame should be mostly blue with small yellow tips. A predominantly yellow or orange flame indicates incomplete combustion. The most common cause is lint or debris inside the burner tube blocking the air intake. Remove the burner tube and clean it thoroughly. Check for lint accumulation in the gas burner compartment (bottom front of dryer). A heavily clogged vent duct can also restrict airflow through the burner assembly, causing incomplete combustion. Adjust the air shutter on the burner tube if equipped. Ensure the dryer vent is clean and the exterior vent flap is unobstructed.

The most successful fix is "Adjust Air Shutter and Replace Burner Tube if Needed" (medium difficulty, ~60 minutes). Estimated DIY cost: $20-$40. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Adjust Air Shutter and Replace Burner Tube if Needed") is rated medium difficulty and takes about 60 minutes. Tools needed: Phillips screwdriver, Flathead screwdriver.

DIY cost: $20-$40. Professional repair typically costs $130-$190. Many homeowners save money by trying the top-ranked community fix first.

The Admiral AGD4475TQ1 7.0 cu ft Gas Dryer with Moisture Sensor and Wrinkle Guard has 8 other known error codes, including: Gas Smell (Gas Odor When Dryer Is Running), Intermittent Heat (Heat Works Then Stops Mid-Cycle), No Heat (No Heat — Drum Turns But Clothes Stay Wet), No Ignition (Igniter Glows But Gas Does Not Ignite), Not Tumbling (Motor Runs But Drum Does Not Turn), and 3 more.