Admiral AGD4475TQ1 7.0 cu ft Gas Dryer with Moisture Sensor and Wrinkle Guard No Ignition Error Fix: Igniter Glows But Gas Does Not Ignite

Error code No Ignition on the Admiral AGD4475TQ1 7.0 cu ft Gas Dryer with Moisture Sensor and Wrinkle Guard means: Igniter Glows But Gas Does Not Ignite. The dryer's flat igniter glows bright orange through the sight window, but the gas valve never opens and no flame appears. This is the #1 gas dryer repair. The gas valve has 2-3 solenoid coils (booster coil + holding coils) that open the valve when the igniter reaches the proper temperature. These coils develop intermittent open circuits — they work when cold but fail as they heat up (resistance increases with temperature). The igniter cycles on and off repeatedly without ever producing a flame. Replace ALL gas valve solenoid coils as a set — never replace just one, as they wear at similar rates.

The most successful fix is "Replace All Gas Valve Solenoid Coils as a Set" (hard difficulty, ~90 minutes). Estimated DIY cost: $60-$90. HomeMD has 2 community-ranked fixes for this error.

This error is rated high severity. You should address it promptly — continued use could cause damage or safety concerns.

Yes — the top-ranked community fix ("Replace All Gas Valve Solenoid Coils as a Set") is rated hard difficulty and takes about 90 minutes. Tools needed: T20 Torx screwdriver, Nut driver set, Multimeter.

DIY cost: $60-$90. Professional repair typically costs $200-$300. Many homeowners save money by trying the top-ranked community fix first.

The Admiral AGD4475TQ1 7.0 cu ft Gas Dryer with Moisture Sensor and Wrinkle Guard has 8 other known error codes, including: Gas Smell (Gas Odor When Dryer Is Running), Intermittent Heat (Heat Works Then Stops Mid-Cycle), No Heat (No Heat — Drum Turns But Clothes Stay Wet), Not Tumbling (Motor Runs But Drum Does Not Turn), Overheating (Dryer Overheating or Burning Smell), and 3 more.