MECH-06
Jenn-Air · JGS1450DS Slide-In Gas Range
The convection fan behind the rear oven wall is making grinding, rattling, or scraping noises, or has stopped spinning entirely — the fan motor bearings may be worn from heat exposure, or the fan blade may be loose on the motor shaft and wobbling; access the fan by removing the rear oven panel (inside the oven cavity — held by screws); check the fan blade for looseness by trying to wiggle it; if the motor shaft turns freely but the blade wobbles, tighten the blade nut; replace the fan motor if bearings are worn (grinding noise stops at motor)
Error MECH-06 on the Jenn-Air JGS1450DS Slide-In Gas Range means: Convection Fan Noisy or Not Spinning. The top-ranked community fix is “Replace Convection Fan Motor” (medium difficulty, ~60 min, DIY cost: $15-$25). 2 community-ranked fixes available below.
Published February 2026 · 2 fixes · oven
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many oven repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $200-$300.
refrigerator · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
refrigerator · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
refrigerator · 2 fixes
Function Key Stuck
Defective Touch Pad or ERC
Oven Over-Temperature
Oven Temperature Sensor Open or Shorted
Oven Temperature Sensor Open Circuit
Control Board Watchdog / Hardware Fault
Function Key Shorted or Stuck
Analog-to-Digital Conversion Error
The Jenn-Air JGS1450DS Slide-In Gas Range has 8 other known error codes:
Error code MECH-06 also appears on 9 other Jenn-Air models:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx