MECH-06
Jenn-Air · JJW2830IM Wall Oven 30 in 4.1 cu ft Single Wall Oven with True Convection and Self-Clean
The convection fan behind the rear oven wall is making grinding, rattling, or scraping noises, or has stopped spinning entirely — the fan motor bearings may be worn from heat exposure, or the fan blade may be loose on the motor shaft and wobbling; access the fan by removing the rear oven panel (inside the oven cavity — held by screws); check the fan blade for looseness by trying to wiggle it; if the motor shaft turns freely but the blade wobbles, tighten the blade nut; replace the fan motor if bearings are worn (grinding noise stops at motor)
Error MECH-06 on the Jenn-Air JJW2830IM Wall Oven 30 in 4.1 cu ft Single Wall Oven with True Convection and Self-Clean means: Convection Fan Noisy or Not Spinning. The top-ranked community fix is “Replace Convection Fan Motor” (medium difficulty, ~60 min, DIY cost: $15-$25). 2 community-ranked fixes available below.
Published February 2026 · 2 fixes · oven
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many oven repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $200-$300.
refrigerator · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
refrigerator · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
refrigerator · 2 fixes
EEPROM Communication Error
EEPROM Checksum Error
Safety Relay Test Failed
Model ID / Configuration Mismatch
Calibration Data Shifted or Corrupt
Shorted Keypad / Touch Interface
Keypad Cable Disconnected
Cancel Key Short
The Jenn-Air JJW2830IM Wall Oven 30 in 4.1 cu ft Single Wall Oven with True Convection and Self-Clean has 8 other known error codes:
Error code MECH-06 also appears on 9 other Jenn-Air models:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx