Jenn-Air JGS1450DS Slide-In Gas Range F0 Error Fix: Function Key Stuck

Error code F0 on the Jenn-Air JGS1450DS Slide-In Gas Range means: Function Key Stuck. A function key or button on the touchpad/membrane is shorted or stuck in the pressed position — the control board detects a continuous signal from one button; disconnect power for 30 seconds and reconnect; if the code returns immediately, the touchpad overlay has failed and needs replacement; if the touchpad is integrated with the ERC (Electronic Range Control) board, the entire ERC assembly must be replaced; moisture behind the touchpad from steam or spills is a common cause of stuck key faults on gas slide-in ranges

The most successful fix is "Replace the Touchpad Overlay or ERC Assembly" (hard difficulty, ~60 minutes). Estimated DIY cost: $20-$40. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace the Touchpad Overlay or ERC Assembly") is rated hard difficulty and takes about 60 minutes. Tools needed: Phillips screwdriver, Multimeter.

DIY cost: $20-$40. Professional repair typically costs $250-$350. Many homeowners save money by trying the top-ranked community fix first.

The Jenn-Air JGS1450DS Slide-In Gas Range has 8 other known error codes, including: F1 (Defective Touch Pad or ERC), F2 (Oven Over-Temperature), F3 (Oven Temperature Sensor Open or Shorted), F4 (Oven Temperature Sensor Open Circuit), F5 (Control Board Watchdog / Hardware Fault), and 3 more.