Jenn-Air JGS1450DS Slide-In Gas Range F1 Error Fix: Defective Touch Pad or ERC

Error code F1 on the Jenn-Air JGS1450DS Slide-In Gas Range means: Defective Touch Pad or ERC. The electronic range control (ERC) has detected an internal fault or communication problem with the touchpad overlay — in most cases the touchpad itself has failed rather than the control board; try disconnecting the touchpad ribbon cable from the ERC board and reconnecting it firmly; if the code returns, replace the touchpad first (less expensive); if the code persists with a new touchpad, replace the ERC control board; power surges and moisture are common causes of ERC failure

The most successful fix is "Replace Touchpad Overlay and ERC Control Board if Needed" (hard difficulty, ~75 minutes). Estimated DIY cost: $40-$50. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace Touchpad Overlay and ERC Control Board if Needed") is rated hard difficulty and takes about 75 minutes. Tools needed: Phillips screwdriver, Multimeter.

DIY cost: $40-$50. Professional repair typically costs $300-$400. Many homeowners save money by trying the top-ranked community fix first.

The Jenn-Air JGS1450DS Slide-In Gas Range has 8 other known error codes, including: F0 (Function Key Stuck), F2 (Oven Over-Temperature), F3 (Oven Temperature Sensor Open or Shorted), F4 (Oven Temperature Sensor Open Circuit), F5 (Control Board Watchdog / Hardware Fault), and 3 more.