Jenn-Air JGS1450DS Slide-In Gas Range F7 Error Fix: Function Key Shorted or Stuck

Error code F7 on the Jenn-Air JGS1450DS Slide-In Gas Range means: Function Key Shorted or Stuck. Similar to F0 but detected at a different point in the diagnostic cycle — a specific function key on the touchpad is registering as continuously pressed; disconnect power, wait 60 seconds, and restore power; if the code returns immediately upon power-up, the touchpad overlay has failed; replace the touchpad; on Jenn-Air slide-in ranges, check for moisture or food residue around the control panel that may be causing the false key press

The most successful fix is "Replace the Touchpad Overlay Assembly" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace the Touchpad Overlay Assembly") is rated medium difficulty and takes about 45 minutes. Tools needed: T15 Torx screwdriver, Multimeter (optional).

DIY cost: $15-$25. Professional repair typically costs $150-$220. Many homeowners save money by trying the top-ranked community fix first.

The Jenn-Air JGS1450DS Slide-In Gas Range has 8 other known error codes, including: F0 (Function Key Stuck), F1 (Defective Touch Pad or ERC), F2 (Oven Over-Temperature), F3 (Oven Temperature Sensor Open or Shorted), F4 (Oven Temperature Sensor Open Circuit), and 3 more.