MECH-02
Jenn-Air · JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash
The lower (main) spray arm jets are clogged with food particles, calcium/mineral deposits, or small debris — the lower arm handles the majority of the cleaning; remove the arm (typically lifts off or unscrews from the center hub), clean all jets thoroughly, and check the center bearing for wear; a spray arm that wobbles on its hub has a worn bearing and should be replaced; after cleaning, spin the arm by hand to verify it rotates freely
Error MECH-02 on the Jenn-Air JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash means: Lower Spray Arm Clogged. The top-ranked community fix is “Replace Worn Lower Spray Arm Bearing and Clean Jets” (medium difficulty, ~30 min, DIY cost: $10-$20). 2 community-ranked fixes available below.
Published February 2026 · 2 fixes · dishwasher
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many dishwasher repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $120-$180.
refrigerator · 2 fixes
dishwasher · 2 fixes
refrigerator · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
refrigerator · 2 fixes
Temperature Sensor Failure
Temperature Sensor Shorted
Stuck Button / User Interface Error
User Interface Board Failure
Wash Pump Motor Not Running
Wash Pump Motor Overcurrent
Wash Pump Motor Stalled
Door Switch / Latch Error
The Jenn-Air JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash has 8 other known error codes:
Error code MECH-02 also appears on 9 other Jenn-Air models:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx