MECH-02
Jenn-Air · JMW2430IM 30 in Combination Microwave Wall Oven with True Convection
The cooktop spark igniter for a surface burner either will not produce a spark or sparks continuously even when the burner is lit — causes include: moisture in the burner switch (common after boil-overs), clogged igniter electrode/port (food debris covering the spark gap), cracked igniter ceramic insulator, dirty burner cap or base preventing proper gas flow, or a faulty spark module; clean and thoroughly dry the burner assembly including the igniter electrode and switch area; if continuous sparking occurs across all burners, moisture in the spark module or a shorted igniter is usually the cause
Error MECH-02 on the Jenn-Air JMW2430IM 30 in Combination Microwave Wall Oven with True Convection means: Surface Burner Won't Light or Sparks Continuously. The top-ranked community fix is “Replace the Spark Igniter Electrode or Spark Module” (medium difficulty, ~45 min, DIY cost: $10-$20). 2 community-ranked fixes available below.
Published February 2026 · 2 fixes · oven
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many oven repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $120-$180.
refrigerator · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
refrigerator · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
refrigerator · 2 fixes
EEPROM Communication Error
EEPROM Checksum Error
Safety Relay Test Failed
Model ID / Configuration Mismatch
Calibration Data Shifted or Corrupt
Shorted Keypad / Touch Interface
Keypad Cable Disconnected
Cancel Key Short
The Jenn-Air JMW2430IM 30 in Combination Microwave Wall Oven with True Convection has 8 other known error codes:
Error code MECH-02 also appears on 9 other Jenn-Air models:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx