Jenn-Air JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash F2E2 Error Fix: User Interface Board Failure

Error code F2E2 on the Jenn-Air JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash means: User Interface Board Failure. The user interface (UI) board cannot communicate properly with the main control board — the display may be blank, flickering, or showing garbled characters; check the ribbon cable between the UI board and the main control board; reseat the connector; replace the UI board if the cable connection is good; on panel-ready Jenn-Air dishwashers, accessing the UI board requires removing the outer door panel

The most successful fix is "Replace the User Interface Board" (hard difficulty, ~60 minutes). Estimated DIY cost: $0-$15. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace the User Interface Board") is rated hard difficulty and takes about 60 minutes. Tools needed: T20 Torx screwdriver, Flathead screwdriver, Multimeter.

DIY cost: $0-$15. Professional repair typically costs $200-$300. Many homeowners save money by trying the top-ranked community fix first.

The Jenn-Air JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash has 8 other known error codes, including: F1E1 (Temperature Sensor Failure), F1E2 (Temperature Sensor Shorted), F2E1 (Stuck Button / User Interface Error), F3E1 (Wash Pump Motor Not Running), F3E2 (Wash Pump Motor Overcurrent), and 3 more.

Error code F2E2 also appears on 1 other Jenn-Air model: JDB9200CWS 24 in TriFecta Dishwasher with 44 dBA, Steam Clean, and WiFi Connectivity. The fix may vary by model, so check each model's specific page for tailored repair steps.