Samsung TV & Audio HW-S800B Ultra Slim 3.0 Channel 360 Watt Soundbar with Dolby Atmos and Bluetooth BT PAIR FAIL Error Fix: Bluetooth Pairing Failure

Error code BT PAIR FAIL on the Samsung TV & Audio HW-S800B Ultra Slim 3.0 Channel 360 Watt Soundbar with Dolby Atmos and Bluetooth means: Bluetooth Pairing Failure. Soundbar cannot be found by Bluetooth devices or pairing fails after discovery. (1) Ensure soundbar is in BT mode (press Source until display shows "BT"), (2) if display shows "BT" (connected to previous device), press and hold the Bluetooth button 3+ seconds to enter pairing mode — display changes to "BT READY" or "BT PAIRING", (3) clear the soundbar's pairing list: press and hold Bluetooth button 5+ seconds until display flashes, (4) remove soundbar from phone/tablet's paired devices list and search again, (5) restart Bluetooth on the source device, (6) factory reset soundbar as last resort. Maximum 10 paired devices stored; only 1 active connection.

The most successful fix is "Perform Factory Reset and Replace Bluetooth Module if Needed" (medium difficulty, ~60 minutes). Estimated DIY cost: $0-$15. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Perform Factory Reset and Replace Bluetooth Module if Needed") is rated medium difficulty and takes about 60 minutes. Tools needed: T10 Torx screwdriver, Multimeter, Plastic pry tool.

DIY cost: $0-$15. Professional repair typically costs $120-$250. Many homeowners save money by trying the top-ranked community fix first.

The Samsung TV & Audio HW-S800B Ultra Slim 3.0 Channel 360 Watt Soundbar with Dolby Atmos and Bluetooth has 8 other known error codes, including: ARC (HDMI ARC Input Mode — Connection Issues), ARC NO AUDIO (No Sound via HDMI ARC/eARC Connection), AUDIO DROPOUT (Audio Drops Out Intermittently), AUTO STANDBY (Soundbar Auto Powers Off After 15-20 Minutes), BT (Bluetooth Mode Active), and 3 more.

Error code BT PAIR FAIL also appears on 2 other Samsung TV & Audio models: HW-B650 3.0 Channel 330 Watt Soundbar with DTS Virtual:X and Bluetooth, HW-Q990C 11.1.4 Channel 546 Watt Soundbar with Dolby Atmos, DTS:X, and Wireless Subwoofer. The fix may vary by model, so check each model's specific page for tailored repair steps.