F7E1
Jenn-Air · JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash
The heating element is not heating the water or the heater relay on the control board has failed — test the heating element for continuity (should read approximately 10-15 ohms); check the element terminals for corrosion; if the element passes electrical testing, the relay on the control board may be defective (the relay is the component that switches power to the element); on Jenn-Air dishwashers the heating element is a ring at the bottom of the tub, accessible from underneath
Error F7E1 on the Jenn-Air JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash means: Heating Element / Heater Relay. The top-ranked community fix is “Test and Replace Heating Element or Heater Relay” (hard difficulty, ~60 min, DIY cost: $10-$25). 2 community-ranked fixes available below.
Published February 2026 · 2 fixes · dishwasher
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many dishwasher repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $180-$250.
dishwasher · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
Temperature Sensor Failure
Temperature Sensor Shorted
Stuck Button / User Interface Error
User Interface Board Failure
Wash Pump Motor Not Running
Wash Pump Motor Overcurrent
Wash Pump Motor Stalled
Door Switch / Latch Error
The Jenn-Air JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash has 8 other known error codes:
Error code F7E1 also appears on 5 other Jenn-Air models:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx