F6E2
Jenn-Air · JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash
The water level has exceeded the maximum safe level — the water inlet valve may be stuck open (not closing when the control de-energizes it); the control activates the drain pump as a safety measure to prevent flooding; replace the water inlet valve; also check the float switch — if stuck in the down position, the control cannot detect the rising water level and continues filling; the float is a small dome-shaped device in the front corner of the tub floor
Error F6E2 on the Jenn-Air JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash means: Water Inlet — Overfill. The top-ranked community fix is “Replace Water Inlet Valve and Inspect Float Switch” (medium difficulty, ~60 min, DIY cost: $20-$35). 2 community-ranked fixes available below.
Published February 2026 · 2 fixes · dishwasher
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many dishwasher repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $150-$220.
dishwasher · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
Temperature Sensor Failure
Temperature Sensor Shorted
Stuck Button / User Interface Error
User Interface Board Failure
Wash Pump Motor Not Running
Wash Pump Motor Overcurrent
Wash Pump Motor Stalled
Door Switch / Latch Error
The Jenn-Air JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash has 8 other known error codes:
Error code F6E2 also appears on 5 other Jenn-Air models:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx