F6E1
Jenn-Air · JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash
The dishwasher is not filling with water within the allotted time (typically 8-10 minutes) — check that the water supply valve under the kitchen sink is fully open; inspect the water inlet valve screen/filter for sediment, calcium buildup, or debris (the screen is inside the valve where the supply hose connects); test the inlet valve solenoid for continuity (should read 500-1,500 ohms); check the float switch in the tub — if stuck in the raised position, it signals "full" and prevents filling; minimum required water pressure is 20 PSI
Error F6E1 on the Jenn-Air JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash means: Water Inlet — Not Filling. The top-ranked community fix is “Test and Replace Water Inlet Valve Solenoid” (medium difficulty, ~45 min, DIY cost: $15-$30). 2 community-ranked fixes available below.
Published February 2026 · 2 fixes · dishwasher
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many dishwasher repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $120-$180.
dishwasher · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
Temperature Sensor Failure
Temperature Sensor Shorted
Stuck Button / User Interface Error
User Interface Board Failure
Wash Pump Motor Not Running
Wash Pump Motor Overcurrent
Wash Pump Motor Stalled
Door Switch / Latch Error
The Jenn-Air JDTSS244GP 24 in Top Control Built-In Dishwasher with 42 dBA, Third Rack, and Sensor Wash has 8 other known error codes:
Error code F6E1 also appears on 5 other Jenn-Air models:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx