🔥Oven / Range

MECH-LIGHT

Hotpoint · RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates

Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates MECH-LIGHT Error Fix: Oven Interior Light Not Working

The oven interior light does not illuminate when the door is opened or the oven light button is pressed — the most common cause is a burned-out bulb; Hotpoint ovens typically use a 40-watt appliance-rated halogen or incandescent bulb; the bulb is located behind a glass lens cover inside the oven cavity (usually on the rear or side wall); always use an appliance-rated bulb (standard household bulbs cannot withstand oven cavity temperatures of 400°F+); if a new bulb does not work, check the oven light socket for corrosion and test the door-activated or push-button light switch for continuity

Medium severity2 fixes available

Quick Answer

Error MECH-LIGHT on the Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates means: Oven Interior Light Not Working. The top-ranked community fix is “Test and Replace Oven Light Switch or Socket” (medium difficulty, ~45 min, DIY cost: $10-$25). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · oven

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many oven repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $120-$180.

Other Hotpoint Models with Error MECH-LIGHT

RBS360DMWW 5.0 cu ft 30 in Free-Standing Electric Range with Self-Clean Oven

oven · 2 fixes

RVM5160DHWW 1.6 cu ft Over-the-Range Microwave with 1000 Watts and Sensor Cooking

microwave · 2 fixes

Other Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates Error Codes

Stuck Touch Pad Key

2 fixes

Electronic Oven Control (ERC) Internal Failure

2 fixes

Oven Over-Temperature Condition

2 fixes

Open Oven Temperature Sensor (RTD Probe)

2 fixes

Shorted Oven Temperature Sensor (RTD Probe)

2 fixes

ERC Relay Board Failure

2 fixes

Stuck Function Key (Bake/Broil/Clean)

2 fixes

Oven Door Lock Motor or Switch Failure

2 fixes

People Also Ask About Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates Error MECH-LIGHT

What does error code MECH-LIGHT mean on a Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates?

Error code MECH-LIGHT on the Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates means: Oven Interior Light Not Working. The oven interior light does not illuminate when the door is opened or the oven light button is pressed — the most common cause is a burned-out bulb; Hotpoint ovens typically use a 40-watt appliance-rated halogen or incandescent bulb; the bulb is located behind a glass lens cover inside the oven cavity (usually on the rear or side wall); always use an appliance-rated bulb (standard household bulbs cannot withstand oven cavity temperatures of 400°F+); if a new bulb does not work, check the oven light socket for corrosion and test the door-activated or push-button light switch for continuity

How do I fix error code MECH-LIGHT on my Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates?

The most successful fix is "Test and Replace Oven Light Switch or Socket" (medium difficulty, ~45 minutes). Estimated DIY cost: $10-$25. HomeMD has 2 community-ranked fixes for this error.

Is error code MECH-LIGHT on a Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates serious?

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Can I fix Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates error MECH-LIGHT myself?

Yes — the top-ranked community fix ("Test and Replace Oven Light Switch or Socket") is rated medium difficulty and takes about 45 minutes. Tools needed: Phillips screwdriver, Multimeter, Needle-nose pliers.

How much does it cost to repair Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates error MECH-LIGHT?

DIY cost: $10-$25. Professional repair typically costs $120-$180. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates have?

The Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates has 8 other known error codes, including: F0 (Stuck Touch Pad Key), F1 (Electronic Oven Control (ERC) Internal Failure), F2 (Oven Over-Temperature Condition), F3 (Open Oven Temperature Sensor (RTD Probe)), F4 (Shorted Oven Temperature Sensor (RTD Probe)), and 3 more.

Which other Hotpoint models have the MECH-LIGHT error?

Error code MECH-LIGHT also appears on 2 other Hotpoint models: RBS360DMWW 5.0 cu ft 30 in Free-Standing Electric Range with Self-Clean Oven, RVM5160DHWW 1.6 cu ft Over-the-Range Microwave with 1000 Watts and Sensor Cooking. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates have?

The Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates has 8 other known error codes:

F0 — Stuck Touch Pad Key (2 fixes)
F1 — Electronic Oven Control (ERC) Internal Failure (2 fixes)
F2 — Oven Over-Temperature Condition (2 fixes)
F3 — Open Oven Temperature Sensor (RTD Probe) (2 fixes)
F4 — Shorted Oven Temperature Sensor (RTD Probe) (2 fixes)
F5 — ERC Relay Board Failure (2 fixes)
F7 — Stuck Function Key (Bake/Broil/Clean) (2 fixes)
F9 — Oven Door Lock Motor or Switch Failure (2 fixes)

Which other Hotpoint models have the MECH-LIGHT error?

Error code MECH-LIGHT also appears on 2 other Hotpoint models:

RBS360DMWW 5.0 cu ft 30 in Free-Standing Electric Range with Self-Clean Oven (oven) · 2 fixes
RVM5160DHWW 1.6 cu ft Over-the-Range Microwave with 1000 Watts and Sensor Cooking (microwave) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx