🔥Oven / Range

Hotpoint · RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates

Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates F5 Error Fix: ERC Relay Board Failure

The Electronic Range Control has detected that an internal relay is not responding correctly — the relay circuit that controls the bake element, broil element, or other oven function cannot be driven properly; this is an internal ERC hardware failure that cannot be field-repaired; the control board must be replaced; this code sometimes appears after a power surge or along with other F-codes; if multiple F-codes display simultaneously, note all of them as they help a technician determine whether the ERC alone is faulty or if other components are also damaged

Medium severity2 fixes available✨ Free fix available

Quick Answer

Error F5 on the Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates means: ERC Relay Board Failure. The top-ranked community fix is “Replace the Electronic Range Control (ERC) Relay Board” (hard difficulty, ~90 min, DIY cost: $150-$220). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · oven

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many oven repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $300-$450.

Other Hotpoint Models with Error F5

RBS360DMWW 5.0 cu ft 30 in Free-Standing Electric Range with Self-Clean Oven

oven · 2 fixes

Other Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates Error Codes

Stuck Touch Pad Key

2 fixes

Electronic Oven Control (ERC) Internal Failure

2 fixes

Oven Over-Temperature Condition

2 fixes

Open Oven Temperature Sensor (RTD Probe)

2 fixes

Shorted Oven Temperature Sensor (RTD Probe)

2 fixes

Stuck Function Key (Bake/Broil/Clean)

2 fixes

Oven Door Lock Motor or Switch Failure

2 fixes

MECH-BURNER

Surface Burner Won't Light or Clicks Continuously

2 fixes

People Also Ask About Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates Error F5

What does error code F5 mean on a Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates?

Error code F5 on the Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates means: ERC Relay Board Failure. The Electronic Range Control has detected that an internal relay is not responding correctly — the relay circuit that controls the bake element, broil element, or other oven function cannot be driven properly; this is an internal ERC hardware failure that cannot be field-repaired; the control board must be replaced; this code sometimes appears after a power surge or along with other F-codes; if multiple F-codes display simultaneously, note all of them as they help a technician determine whether the ERC alone is faulty or if other components are also damaged

How do I fix error code F5 on my Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates?

The most successful fix is "Replace the Electronic Range Control (ERC) Relay Board" (hard difficulty, ~90 minutes). Estimated DIY cost: $150-$220. HomeMD has 2 community-ranked fixes for this error.

Is error code F5 on a Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates serious?

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Can I fix Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates error F5 myself?

Yes — the top-ranked community fix ("Replace the Electronic Range Control (ERC) Relay Board") is rated hard difficulty and takes about 90 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Labeling tape.

How much does it cost to repair Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates error F5?

DIY cost: $150-$220. Professional repair typically costs $300-$450. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates have?

The Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates has 8 other known error codes, including: F0 (Stuck Touch Pad Key), F1 (Electronic Oven Control (ERC) Internal Failure), F2 (Oven Over-Temperature Condition), F3 (Open Oven Temperature Sensor (RTD Probe)), F4 (Shorted Oven Temperature Sensor (RTD Probe)), and 3 more.

Which other Hotpoint models have the F5 error?

Error code F5 also appears on 1 other Hotpoint model: RBS360DMWW 5.0 cu ft 30 in Free-Standing Electric Range with Self-Clean Oven. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates have?

The Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates has 8 other known error codes:

F0 — Stuck Touch Pad Key (2 fixes)
F1 — Electronic Oven Control (ERC) Internal Failure (2 fixes)
F2 — Oven Over-Temperature Condition (2 fixes)
F3 — Open Oven Temperature Sensor (RTD Probe) (2 fixes)
F4 — Shorted Oven Temperature Sensor (RTD Probe) (2 fixes)
F7 — Stuck Function Key (Bake/Broil/Clean) (2 fixes)
F9 — Oven Door Lock Motor or Switch Failure (2 fixes)
MECH-BURNER — Surface Burner Won't Light or Clicks Continuously (2 fixes)

Which other Hotpoint models have the F5 error?

Error code F5 also appears on 1 other Hotpoint model:

RBS360DMWW 5.0 cu ft 30 in Free-Standing Electric Range with Self-Clean Oven (oven) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx