Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates MECH-IGNITER Error Fix: Gas Oven Igniter Weak or Failed — Oven Won't Heat

Error code MECH-IGNITER on the Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates means: Gas Oven Igniter Weak or Failed — Oven Won't Heat. The flat hot surface igniter (HSI) has weakened over time and no longer draws enough amperage to open the gas safety valve — this is the #1 most common gas range/oven repair; the igniter may visibly glow orange-red but the gas still does not flow; the gas safety valve requires the igniter to draw a minimum of 3.2-3.6 amps before it opens (this is a safety design — the valve won't open unless it confirms the igniter is hot enough to immediately ignite the gas); as the igniter ages, its current draw decreases below this threshold; test with an amp clamp meter while the igniter is energized; a new igniter typically draws 3.5+ amps; NEVER attempt to manually light a gas oven with a match when the igniter has failed; replace the igniter — it is usually a flat silicon carbide or silicon nitride element mounted on the oven burner assembly

The most successful fix is "Replace Oven Igniter with OEM Part" (medium difficulty, ~45 minutes). Estimated DIY cost: $40-$60. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace Oven Igniter with OEM Part") is rated medium difficulty and takes about 45 minutes. Tools needed: Phillips screwdriver, Needle-nose pliers, Multimeter (optional).

DIY cost: $40-$60. Professional repair typically costs $180-$250. Many homeowners save money by trying the top-ranked community fix first.

The Hotpoint RGA724EKWH 5.0 cu ft 30 in Gas Range with Sealed Burners and Continuous Grates has 8 other known error codes, including: F0 (Stuck Touch Pad Key), F1 (Electronic Oven Control (ERC) Internal Failure), F2 (Oven Over-Temperature Condition), F3 (Open Oven Temperature Sensor (RTD Probe)), F4 (Shorted Oven Temperature Sensor (RTD Probe)), and 3 more.