Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor VIBRATION Error Fix: Excessive Vibration During Spin

Error code VIBRATION on the Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor means: Excessive Vibration During Spin. The washer vibrates excessively or walks across the floor during the spin cycle — the washer may not be level (adjust the leveling feet), the load may be unbalanced, the shipping bolts may still be installed (remove during installation), or the shock absorbers/springs may be worn; ensure all four feet are firmly on the floor and the washer is level

The most successful fix is "Replace Shock Absorbers and Inspect Suspension Springs" (medium difficulty, ~90 minutes). Estimated DIY cost: $50-$80. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace Shock Absorbers and Inspect Suspension Springs") is rated medium difficulty and takes about 90 minutes. Tools needed: T20 Torx screwdriver, Pliers, Adjustable wrench, Flashlight.

DIY cost: $50-$80. Professional repair typically costs $120-$200. Many homeowners save money by trying the top-ranked community fix first.

The Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor has 8 other known error codes, including: DOOR-SEAL-TEAR (Door Seal (Boot Gasket) Torn or Moldy), E7:01 (SmartDrive Motor Stall), E7:04 (SmartDrive Motor Overheated), Err-10 (Fill Timeout (No Water Supply)), Err-20 (Drain Timeout), and 3 more.