Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor Err-10 Error Fix: Fill Timeout (No Water Supply)

Error code Err-10 on the Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor means: Fill Timeout (No Water Supply). The washer did not detect water filling within the allowed time — check that both hot and cold water supply taps are fully turned on, the inlet hoses are not kinked, the inlet screens (filters in the hose connections) are not blocked with debris, and the water pressure is adequate; this is the most common F&P washer fault and is usually a supply issue, not a machine fault

The most successful fix is "Replace Water Inlet Valve Assembly" (medium difficulty, ~60 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace Water Inlet Valve Assembly") is rated medium difficulty and takes about 60 minutes. Tools needed: Adjustable wrench, Phillips screwdriver, Flashlight.

DIY cost: $15-$25. Professional repair typically costs $150-$250. Many homeowners save money by trying the top-ranked community fix first.

The Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor has 8 other known error codes, including: DOOR-SEAL-TEAR (Door Seal (Boot Gasket) Torn or Moldy), E7:01 (SmartDrive Motor Stall), E7:04 (SmartDrive Motor Overheated), Err-20 (Drain Timeout), Err-30 (Out of Balance), and 3 more.