Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor E7:01 Error Fix: SmartDrive Motor Stall

Error code E7:01 on the Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor means: SmartDrive Motor Stall. The SmartDrive direct-drive motor has stalled — this is often caused by an overloaded drum, items jammed between the inner and outer tub, or a foreign object wedged under the drum; remove excess items and check for obstructions; the SmartDrive motor does not use belts so belt issues are not applicable

The most successful fix is "Inspect and Replace SmartDrive Motor or Motor Control Board" (hard difficulty, ~90 minutes). Estimated DIY cost: $0-$15. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Inspect and Replace SmartDrive Motor or Motor Control Board") is rated hard difficulty and takes about 90 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Nut driver set.

DIY cost: $0-$15. Professional repair typically costs $300-$450. Many homeowners save money by trying the top-ranked community fix first.

The Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor has 8 other known error codes, including: DOOR-SEAL-TEAR (Door Seal (Boot Gasket) Torn or Moldy), E7:04 (SmartDrive Motor Overheated), Err-10 (Fill Timeout (No Water Supply)), Err-20 (Drain Timeout), Err-30 (Out of Balance), and 3 more.