Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor E7:04 Error Fix: SmartDrive Motor Overheated

Error code E7:04 on the Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor means: SmartDrive Motor Overheated. The SmartDrive motor temperature has exceeded the safe operating limit — this occurs during extended cycles with heavy loads especially in warm environments; allow the motor to cool for 30 minutes; reduce load sizes if this occurs repeatedly; the motor thermal protection will reset automatically once cooled

The most successful fix is "Check and Replace Motor Temperature Sensor or Motor Assembly" (medium difficulty, ~75 minutes). Estimated DIY cost: $10-$20. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Check and Replace Motor Temperature Sensor or Motor Assembly") is rated medium difficulty and takes about 75 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Nut driver set.

DIY cost: $10-$20. Professional repair typically costs $250-$400. Many homeowners save money by trying the top-ranked community fix first.

The Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor has 8 other known error codes, including: DOOR-SEAL-TEAR (Door Seal (Boot Gasket) Torn or Moldy), E7:01 (SmartDrive Motor Stall), Err-10 (Fill Timeout (No Water Supply)), Err-20 (Drain Timeout), Err-30 (Out of Balance), and 3 more.