Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor Err-60 Error Fix: Heater Fault

Error code Err-60 on the Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor means: Heater Fault. The water heating element is not heating or has an electrical fault — the element may be open-circuit (failed), the thermistor may be faulty, or there is a wiring issue; cold water washing may still work but hot wash cycles will not reach the correct temperature; the heating element is located in the sump area

The most successful fix is "Test and Replace the Heating Element and Thermistor" (hard difficulty, ~90 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Test and Replace the Heating Element and Thermistor") is rated hard difficulty and takes about 90 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Needle-nose pliers.

DIY cost: $15-$25. Professional repair typically costs $220-$350. Many homeowners save money by trying the top-ranked community fix first.

The Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor has 8 other known error codes, including: DOOR-SEAL-TEAR (Door Seal (Boot Gasket) Torn or Moldy), E7:01 (SmartDrive Motor Stall), E7:04 (SmartDrive Motor Overheated), Err-10 (Fill Timeout (No Water Supply)), Err-20 (Drain Timeout), and 3 more.