👕Washer

Err-80

Fisher & Paykel · Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor

Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor Err-80 Error Fix: Pressure Sensor Fault

The water level pressure sensor is not providing correct readings — the pressure hose may be blocked, kinked, or disconnected from the pressure sensor, or the sensor itself has failed; incorrect water level readings can cause overfilling or underfilling

Medium severity2 fixes available✨ Free fix available

Quick Answer

Error Err-80 on the Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor means: Pressure Sensor Fault. The top-ranked community fix is “Replace the Water Level Pressure Sensor” (medium difficulty, ~45 min, DIY cost: $15-$25). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · washer

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many washer repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $150-$220.

Other Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor Error Codes

DOOR-SEAL-TEAR

Door Seal (Boot Gasket) Torn or Moldy

2 fixes

E7:01

SmartDrive Motor Stall

2 fixes

E7:04

SmartDrive Motor Overheated

2 fixes

Err-10

Fill Timeout (No Water Supply)

Drain Timeout

Out of Balance

Door Lock Fault

Motor Fault

People Also Ask About Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor Error Err-80

What does error code Err-80 mean on a Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor?

Error code Err-80 on the Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor means: Pressure Sensor Fault. The water level pressure sensor is not providing correct readings — the pressure hose may be blocked, kinked, or disconnected from the pressure sensor, or the sensor itself has failed; incorrect water level readings can cause overfilling or underfilling

How do I fix error code Err-80 on my Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor?

The most successful fix is "Replace the Water Level Pressure Sensor" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

Is error code Err-80 on a Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor serious?

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Can I fix Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor error Err-80 myself?

Yes — the top-ranked community fix ("Replace the Water Level Pressure Sensor") is rated medium difficulty and takes about 45 minutes. Tools needed: T20 Torx screwdriver, Needle-nose pliers, Multimeter.

How much does it cost to repair Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor error Err-80?

DIY cost: $15-$25. Professional repair typically costs $150-$220. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor have?

The Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor has 8 other known error codes, including: DOOR-SEAL-TEAR (Door Seal (Boot Gasket) Torn or Moldy), E7:01 (SmartDrive Motor Stall), E7:04 (SmartDrive Motor Overheated), Err-10 (Fill Timeout (No Water Supply)), Err-20 (Drain Timeout), and 3 more.

What other error codes does the Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor have?

The Fisher & Paykel Fisher & Paykel WH2424F1 24-Inch 2.4 cu ft Front Load Washer with SmartDrive Direct-Drive Motor has 8 other known error codes:

DOOR-SEAL-TEAR — Door Seal (Boot Gasket) Torn or Moldy (2 fixes)
E7:01 — SmartDrive Motor Stall (2 fixes)
E7:04 — SmartDrive Motor Overheated (2 fixes)
Err-10 — Fill Timeout (No Water Supply) (2 fixes)
Err-20 — Drain Timeout (2 fixes)
Err-30 — Out of Balance (2 fixes)
Err-40 — Door Lock Fault (2 fixes)
Err-50 — Motor Fault (2 fixes)

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx