Electrolux EI24ID50QS 24 in Built-In Dishwasher with IQ-Touch Controls 44 dBA MECH-ROLLER Error Fix: Rack Wheel or Roller Broken

Error code MECH-ROLLER on the Electrolux EI24ID50QS 24 in Built-In Dishwasher with IQ-Touch Controls 44 dBA means: Rack Wheel or Roller Broken. The dish rack is difficult to slide in and out of the dishwasher, or it tilts to one side. Rack wheels or rollers have cracked, come off, or the axle has corroded. Inspect all wheels on the rack — Electrolux racks typically have 4-8 rollers per rack. Replacement rack roller wheels are available in sets. On adjustable upper racks, check the height-adjustment mechanism for proper locking. Replace worn rollers to prevent dishware from sliding and breaking during the cycle.

The most successful fix is "Replace Broken Rack Wheels or Rollers" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

This error is rated low severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Yes — the top-ranked community fix ("Replace Broken Rack Wheels or Rollers") is rated medium difficulty and takes about 45 minutes. Tools needed: Flathead screwdriver, Phillips screwdriver, Needle-nose pliers.

DIY cost: $15-$25. Professional repair typically costs $120-$180. Many homeowners save money by trying the top-ranked community fix first.

The Electrolux EI24ID50QS 24 in Built-In Dishwasher with IQ-Touch Controls 44 dBA has 8 other known error codes, including: ER:01 (Wash Motor Stuck or Locked), i10 (Water Supply Issue — Not Filling), i20 (Drain Issue — Not Draining Properly), i30 (Leak Detected — Anti-Flood Activated), i50 (Drain Pump Short or Fault), and 3 more.

Error code MECH-ROLLER also appears on 2 other Electrolux models: ELFE7637AT 7.4 cu ft Electric Dryer with Steam Refresh and Wrinkle Care, ELFE7637AW 7.6 cu ft Electric Dryer with Steam and Sensor Dry. The fix may vary by model, so check each model's specific page for tailored repair steps.