Electrolux EI24ID50QS 24 in Built-In Dishwasher with IQ-Touch Controls 44 dBA i30 Error Fix: Leak Detected — Anti-Flood Activated

Error code i30 on the Electrolux EI24ID50QS 24 in Built-In Dishwasher with IQ-Touch Controls 44 dBA means: Leak Detected — Anti-Flood Activated. The anti-flood sensor in the base of the dishwasher has detected water where it should not be. The dishwasher stops operation and the drain pump activates to remove water. Carefully pull the dishwasher out and inspect underneath for the leak source. Common sources: door gasket failure, spray arm seal, inlet hose connection, drain hose connection, tub-to-sump gasket, and cracked sump housing. Tilt the dishwasher slightly backward to drain residual water from the base pan. Dry the base pan and anti-flood sensor before reinstalling. Test for leaks with a short wash cycle.

The most successful fix is "Replace Door Gasket or Inspect and Replace Leak Source Components" (medium difficulty, ~60 minutes). Estimated DIY cost: $15-$40. HomeMD has 2 community-ranked fixes for this error.

This error is rated critical severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Yes — the top-ranked community fix ("Replace Door Gasket or Inspect and Replace Leak Source Components") is rated medium difficulty and takes about 60 minutes. Tools needed: Phillips screwdriver, Flathead screwdriver, Flashlight, Pliers, Towel.

DIY cost: $15-$40. Professional repair typically costs $150-$250. Many homeowners save money by trying the top-ranked community fix first.

The Electrolux EI24ID50QS 24 in Built-In Dishwasher with IQ-Touch Controls 44 dBA has 8 other known error codes, including: ER:01 (Wash Motor Stuck or Locked), i10 (Water Supply Issue — Not Filling), i20 (Drain Issue — Not Draining Properly), i50 (Drain Pump Short or Fault), i60 (Heating Element Fault — Water Not Heating), and 3 more.