Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle dL Error Fix: Door Lock Failure

The door lock mechanism has failed — the door cannot be locked or the lock switch is not confirming the locked position. This is similar to F5E2 but may appear as a standalone code on some software versions. Check the door lock assembly for mechanical binding. Verify the door striker is properly aligned. Inspect the lock motor wiring. The door lock assembly is inside the front panel, accessible by removing the front lower panel or the door boot clamp. Replace the door lock assembly if the motor does not operate or the lock does not engage.

Medium severity2 fixes available✨ Free fix available

Quick Answer

Error dL on the Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle means: Door Lock Failure. The top-ranked community fix is “Replace the Door Lock Assembly” (hard difficulty, ~60 min, DIY cost: $10-$20). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · washer

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many washer repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $150-$220.

Other Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle Error Codes

F0E2

Overloaded or Excessive Suds

2 fixes

F0E5

Off-Balance Load Detected

2 fixes

F1E1

Main Control EEPROM Error

2 fixes

F1E2

Motor Control Unit Error

2 fixes

F3E1

Pressure Switch / Water Level Sensor Error

2 fixes

F3E2

Water Temperature Sensor Fault

Door Switch Error

Door Lock Error

People Also Ask About Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle Error dL

What does error code dL mean on a Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle?

Error code dL on the Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle means: Door Lock Failure. The door lock mechanism has failed — the door cannot be locked or the lock switch is not confirming the locked position. This is similar to F5E2 but may appear as a standalone code on some software versions. Check the door lock assembly for mechanical binding. Verify the door striker is properly aligned. Inspect the lock motor wiring. The door lock assembly is inside the front panel, accessible by removing the front lower panel or the door boot clamp. Replace the door lock assembly if the motor does not operate or the lock does not engage.

How do I fix error code dL on my Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle?

The most successful fix is "Replace the Door Lock Assembly" (hard difficulty, ~60 minutes). Estimated DIY cost: $10-$20. HomeMD has 2 community-ranked fixes for this error.

Is error code dL on a Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle serious?

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Can I fix Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle error dL myself?

Yes — the top-ranked community fix ("Replace the Door Lock Assembly") is rated hard difficulty and takes about 60 minutes. Tools needed: Phillips screwdriver, Flathead screwdriver, Multimeter.

How much does it cost to repair Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle error dL?

DIY cost: $10-$20. Professional repair typically costs $150-$220. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle have?

The Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle has 8 other known error codes, including: F0E2 (Overloaded or Excessive Suds), F0E5 (Off-Balance Load Detected), F1E1 (Main Control EEPROM Error), F1E2 (Motor Control Unit Error), F3E1 (Pressure Switch / Water Level Sensor Error), and 3 more.

What other error codes does the Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle have?

The Amana NFW5800HW 4.3 cu ft Front Load Washer with Steam and Sanitize Cycle has 8 other known error codes:

F0E2 — Overloaded or Excessive Suds (2 fixes)
F0E5 — Off-Balance Load Detected (2 fixes)
F1E1 — Main Control EEPROM Error (2 fixes)
F1E2 — Motor Control Unit Error (2 fixes)
F3E1 — Pressure Switch / Water Level Sensor Error (2 fixes)
F3E2 — Water Temperature Sensor Fault (2 fixes)
F5E1 — Door Switch Error (2 fixes)
F5E2 — Door Lock Error (2 fixes)

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx