Samsung Samsung DVG45R6100W 7.5 cu. ft. Gas Dryer with Multi-Steam tE Error Fix: Temperature Sensor Error

Error code tE on the Samsung Samsung DVG45R6100W 7.5 cu. ft. Gas Dryer with Multi-Steam means: Temperature Sensor Error. The dryer thermistor (temperature sensor) is reading out of range or has failed. The thermistor monitors drum air temperature to regulate heating. Without accurate temperature readings, the dryer cannot control heat properly. The thermistor is typically located in the exhaust duct inside the dryer. Test with a multimeter — resistance should change smoothly with temperature. Replace the thermistor if readings are erratic or open circuit.

The most successful fix is "Replace Faulty Thermistor Sensor" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

This error is rated warning severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Yes — the top-ranked community fix ("Replace Faulty Thermistor Sensor") is rated medium difficulty and takes about 45 minutes. Tools needed: Phillips screwdriver, Multimeter.

DIY cost: $15-$25. Professional repair typically costs $120-$200. Many homeowners save money by trying the top-ranked community fix first.

The Samsung Samsung DVG45R6100W 7.5 cu. ft. Gas Dryer with Multi-Steam has 8 other known error codes, including: 3C (Motor Current Error), 9C1 (Voltage Error), 9E (Low Voltage), AC (Communication Error (alternate)), AE (Communication Error), and 3 more.

Error code tE also appears on 5 other Samsung models: Samsung DVE45R6100W 7.5 cu. ft. Electric Dryer with Steam Sanitize+, Samsung DW80B7070US Smart 42 dBA Dishwasher, Samsung DW80R5060US StormWash 24 in. Dishwasher, Samsung WA50R5400AW 5.0 cu. ft. Top Load Washer, Samsung WF45R6100AW 4.5 cu. ft. Front Load Washer. The fix may vary by model, so check each model's specific page for tailored repair steps.