Samsung Samsung DVG45R6100W 7.5 cu. ft. Gas Dryer with Multi-Steam DRUM ROLLER NOISE Error Fix: Drum Support Roller Wear

Error code DRUM ROLLER NOISE on the Samsung Samsung DVG45R6100W 7.5 cu. ft. Gas Dryer with Multi-Steam means: Drum Support Roller Wear. Worn drum support rollers cause thumping, squealing, or rumbling noises during operation. Samsung dryers typically have 4 drum support rollers (2 front, 2 rear). Over time, the rubber coating wears flat or develops flat spots. Replace all 4 rollers at once — rollers are inexpensive ($5-10 each) and if one is worn, the others are close behind. Replacing rollers requires removing the front panel and drum. While the dryer is apart, inspect and replace the idler pulley and belt if worn.

The most successful fix is "Replace All Four Drum Support Rollers and Inspect Belt" (hard difficulty, ~90 minutes). Estimated DIY cost: $40-$60. HomeMD has 2 community-ranked fixes for this error.

This error is rated warning severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Yes — the top-ranked community fix ("Replace All Four Drum Support Rollers and Inspect Belt") is rated hard difficulty and takes about 90 minutes. Tools needed: T20 Torx screwdriver, Phillips screwdriver, Socket wrench set.

DIY cost: $40-$60. Professional repair typically costs $180-$250. Many homeowners save money by trying the top-ranked community fix first.

The Samsung Samsung DVG45R6100W 7.5 cu. ft. Gas Dryer with Multi-Steam has 8 other known error codes, including: 3C (Motor Current Error), 9C1 (Voltage Error), 9E (Low Voltage), AC (Communication Error (alternate)), AE (Communication Error), and 3 more.

Error code DRUM ROLLER NOISE also appears on 1 other Samsung model: Samsung DVE45R6100W 7.5 cu. ft. Electric Dryer with Steam Sanitize+. The fix may vary by model, so check each model's specific page for tailored repair steps.