🍽️Dishwasher

F26

Miele · Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos

Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos F26 Error Fix: NTC Temperature Sensor Fault

The NTC thermistor that measures wash water temperature is reading out of range. Check sensor resistance: approximately 50K ohms at 25°C, decreasing with temperature. Check wiring and connector for corrosion or damage. A faulty NTC causes incorrect temperature regulation. Replace the NTC sensor.

warning2 fixes available✨ Free fix available

Quick Answer

Error F26 on the Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos means: NTC Temperature Sensor Fault. The top-ranked community fix is “Test and Replace the NTC Temperature Sensor” (medium difficulty, ~45 min, DIY cost: $15-$25). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · dishwasher

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many dishwasher repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $120-$180.

Other Miele Models with Error F26

Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos

dishwasher · 2 fixes

Other Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos Error Codes

DETERGENT DISP FAIL

Detergent Dispenser Mechanism Failure

2 fixes

DOOR LATCH WEAR

Door Latch Mechanism Worn

Drain Pump Failure

Water Intake Fault

Water Drainage Fault

Water Inlet Temperature Too Cold

2 fixes

F14

Water Inlet Temperature Too Hot

2 fixes

F15

Door Fault

2 fixes

People Also Ask About Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos Error F26

What does error code F26 mean on a Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos?

Error code F26 on the Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos means: NTC Temperature Sensor Fault. The NTC thermistor that measures wash water temperature is reading out of range. Check sensor resistance: approximately 50K ohms at 25°C, decreasing with temperature. Check wiring and connector for corrosion or damage. A faulty NTC causes incorrect temperature regulation. Replace the NTC sensor.

How do I fix error code F26 on my Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos?

The most successful fix is "Test and Replace the NTC Temperature Sensor" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

Is error code F26 on a Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos serious?

This error is rated warning severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Can I fix Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos error F26 myself?

Yes — the top-ranked community fix ("Test and Replace the NTC Temperature Sensor") is rated medium difficulty and takes about 45 minutes. Tools needed: T20 Torx screwdriver, Digital multimeter, Needle-nose pliers.

How much does it cost to repair Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos error F26?

DIY cost: $15-$25. Professional repair typically costs $120-$180. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos have?

The Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos has 8 other known error codes, including: DETERGENT DISP FAIL (Detergent Dispenser Mechanism Failure), DOOR LATCH WEAR (Door Latch Mechanism Worn), DRAIN PUMP FAIL (Drain Pump Failure), F11 (Water Intake Fault), F12 (Water Drainage Fault), and 3 more.

Which other Miele models have the F26 error?

Error code F26 also appears on 1 other Miele model: Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos have?

The Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos has 8 other known error codes:

DETERGENT DISP FAIL — Detergent Dispenser Mechanism Failure (2 fixes)
DOOR LATCH WEAR — Door Latch Mechanism Worn (2 fixes)
DRAIN PUMP FAIL — Drain Pump Failure (2 fixes)
F11 — Water Intake Fault (2 fixes)
F12 — Water Drainage Fault (2 fixes)
F13 — Water Inlet Temperature Too Cold (2 fixes)
F14 — Water Inlet Temperature Too Hot (2 fixes)
F15 — Door Fault (2 fixes)

Which other Miele models have the F26 error?

Error code F26 also appears on 1 other Miele model:

Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos (dishwasher) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx