Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos F11 Error Fix: Water Intake Fault

Error code F11 on the Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos means: Water Intake Fault. Water is not entering the dishwasher within the allotted fill time. Check that the water supply stopcock is fully open. Inspect the inlet hose for kinks or blockages. Check the water inlet valve solenoid for continuity. Verify water pressure is at least 1 bar (14.5 PSI). Check the inlet hose filter screen for debris or mineral deposits. On models with AquaStop inlet hose, verify the safety valve has not tripped.

The most successful fix is "Test and Replace the Water Inlet Valve Solenoid" (medium difficulty, ~45 minutes). Estimated DIY cost: $10-$20. HomeMD has 2 community-ranked fixes for this error.

This error is rated critical severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Yes — the top-ranked community fix ("Test and Replace the Water Inlet Valve Solenoid") is rated medium difficulty and takes about 45 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Adjustable wrench, Towel.

DIY cost: $10-$20. Professional repair typically costs $120-$180. Many homeowners save money by trying the top-ranked community fix first.

The Miele Miele G 5266 SCVi 24" Fully Integrated Dishwasher with AutoDos has 8 other known error codes, including: DETERGENT DISP FAIL (Detergent Dispenser Mechanism Failure), DOOR LATCH WEAR (Door Latch Mechanism Worn), DRAIN PUMP FAIL (Drain Pump Failure), F12 (Water Drainage Fault), F13 (Water Inlet Temperature Too Cold), and 3 more.

Error code F11 also appears on 5 other Miele models: Miele G 7366 SCVi 24" Fully Integrated Dishwasher with AutoDos, Miele TWI 180 WP T1 Heat Pump Dryer with WiFiConn@ct, Miele TXD 160 WP T1 Heat Pump Dryer, Miele WWH 860 WCS W1 Front-Load Washer with TwinDos, Miele WXD 160 WCS W1 Front-Load Washer. The fix may vary by model, so check each model's specific page for tailored repair steps.