KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range F3E6 Error Fix: Gas Igniter / Flame Failure

The gas oven igniter (hot surface igniter / glow bar) is not drawing sufficient current to open the gas safety valve, or the control is not detecting flame after ignition. The igniter must draw ≥3.2 amps to open the gas valve — a weak igniter glows visibly but cannot pull enough current. Replace igniter assembly. This is the #1 gas oven repair.

High severity2 fixes available

Quick Answer

Error F3E6 on the KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range means: Gas Igniter / Flame Failure. The top-ranked community fix is “Replace the Gas Oven Igniter Assembly” (hard difficulty, ~45 min, DIY cost: $15-$25). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · oven

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many oven repairs can be done safely at home, consider hiring a qualified technician if:

This is a high severity error — continued use may cause damage or a safety hazard
The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $180-$250.

Other KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range Error Codes

BURNER WON'T LIGHT

Surface Burner Continuous Sparking (Gas Only)

2 fixes

DOOR NOT CLOSING

Oven Door Not Closing Flush

2 fixes

ELEMENT BURNED OUT

Bake or Broil Element Burned Out (Electric)

2 fixes

F1E0

EEPROM Communication Error

2 fixes

F1E1

EEPROM Checksum Error

2 fixes

F1E2

Safety Relay Test Failed

2 fixes

F2E0

Shorted Keypad / Touch Interface

2 fixes

F2E1

Keypad Cable Disconnected

2 fixes

People Also Ask About KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range Error F3E6

What does error code F3E6 mean on a KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range?

Error code F3E6 on the KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range means: Gas Igniter / Flame Failure. The gas oven igniter (hot surface igniter / glow bar) is not drawing sufficient current to open the gas safety valve, or the control is not detecting flame after ignition. The igniter must draw ≥3.2 amps to open the gas valve — a weak igniter glows visibly but cannot pull enough current. Replace igniter assembly. This is the #1 gas oven repair.

How do I fix error code F3E6 on my KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range?

The most successful fix is "Replace the Gas Oven Igniter Assembly" (hard difficulty, ~45 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

Is error code F3E6 on a KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range serious?

This error is rated high severity. You should address it promptly — continued use could cause damage or safety concerns.

Can I fix KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range error F3E6 myself?

Yes — the top-ranked community fix ("Replace the Gas Oven Igniter Assembly") is rated hard difficulty and takes about 45 minutes. Tools needed: T20 Torx screwdriver, Nut driver set, Multimeter.

How much does it cost to repair KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range error F3E6?

DIY cost: $15-$25. Professional repair typically costs $180-$250. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range have?

The KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range has 8 other known error codes, including: BURNER WON'T LIGHT (Surface Burner Continuous Sparking (Gas Only)), DOOR NOT CLOSING (Oven Door Not Closing Flush), ELEMENT BURNED OUT (Bake or Broil Element Burned Out (Electric)), F1E0 (EEPROM Communication Error), F1E1 (EEPROM Checksum Error), and 3 more.

What other error codes does the KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range have?

The KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range has 8 other known error codes:

BURNER WON'T LIGHT — Surface Burner Continuous Sparking (Gas Only) (2 fixes)
DOOR NOT CLOSING — Oven Door Not Closing Flush (2 fixes)
ELEMENT BURNED OUT — Bake or Broil Element Burned Out (Electric) (2 fixes)
F1E0 — EEPROM Communication Error (2 fixes)
F1E1 — EEPROM Checksum Error (2 fixes)
F1E2 — Safety Relay Test Failed (2 fixes)
F2E0 — Shorted Keypad / Touch Interface (2 fixes)
F2E1 — Keypad Cable Disconnected (2 fixes)

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx