🔥Oven / Range

BURNER WON'T LIGHT

KitchenAid · KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range

KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range BURNER WON'T LIGHT Error Fix: Surface Burner Continuous Sparking (Gas Only)

Spark igniter for cooktop burner won't produce a spark, or sparks continuously even when the burner is lit. Moisture in the burner switch after cleaning or boilover spills, clogged igniter electrode, dirty burner cap. Clean and dry the burner assembly. Allow to dry 24-48 hours if sparking continues.

Medium severity2 fixes available✨ Free fix available

Quick Answer

Error BURNER WON'T LIGHT on the KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range means: Surface Burner Continuous Sparking (Gas Only). The top-ranked community fix is “Replace Spark Igniter Electrode or Burner Switch” (medium difficulty, ~60 min, DIY cost: $15-$30). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · oven

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many oven repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $150-$220.

Other KitchenAid Models with Error BURNER WON'T LIGHT

KFEG500ESS 30 in. 5-Element Electric Convection Slide-In Range

oven · 2 fixes

KOSE500ESS 30 in. Single Wall Oven with Even-Heat True Convection

oven · 2 fixes

Other KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range Error Codes

DOOR NOT CLOSING

Oven Door Not Closing Flush

2 fixes

ELEMENT BURNED OUT

Bake or Broil Element Burned Out (Electric)

2 fixes

F1E0

EEPROM Communication Error

2 fixes

F1E1

EEPROM Checksum Error

2 fixes

F1E2

Safety Relay Test Failed

2 fixes

F2E0

Shorted Keypad / Touch Interface

2 fixes

F2E1

Keypad Cable Disconnected

2 fixes

F2E5

Cancel Key Shorted

2 fixes

People Also Ask About KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range Error BURNER WON'T LIGHT

What does error code BURNER WON'T LIGHT mean on a KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range?

Error code BURNER WON'T LIGHT on the KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range means: Surface Burner Continuous Sparking (Gas Only). Spark igniter for cooktop burner won't produce a spark, or sparks continuously even when the burner is lit. Moisture in the burner switch after cleaning or boilover spills, clogged igniter electrode, dirty burner cap. Clean and dry the burner assembly. Allow to dry 24-48 hours if sparking continues.

How do I fix error code BURNER WON'T LIGHT on my KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range?

The most successful fix is "Replace Spark Igniter Electrode or Burner Switch" (medium difficulty, ~60 minutes). Estimated DIY cost: $15-$30. HomeMD has 2 community-ranked fixes for this error.

Is error code BURNER WON'T LIGHT on a KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range serious?

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Can I fix KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range error BURNER WON'T LIGHT myself?

Yes — the top-ranked community fix ("Replace Spark Igniter Electrode or Burner Switch") is rated medium difficulty and takes about 60 minutes. Tools needed: Phillips screwdriver, Multimeter.

How much does it cost to repair KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range error BURNER WON'T LIGHT?

DIY cost: $15-$30. Professional repair typically costs $150-$220. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range have?

The KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range has 8 other known error codes, including: DOOR NOT CLOSING (Oven Door Not Closing Flush), ELEMENT BURNED OUT (Bake or Broil Element Burned Out (Electric)), F1E0 (EEPROM Communication Error), F1E1 (EEPROM Checksum Error), F1E2 (Safety Relay Test Failed), and 3 more.

Which other KitchenAid models have the BURNER WON'T LIGHT error?

Error code BURNER WON'T LIGHT also appears on 2 other KitchenAid models: KFEG500ESS 30 in. 5-Element Electric Convection Slide-In Range, KOSE500ESS 30 in. Single Wall Oven with Even-Heat True Convection. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range have?

The KitchenAid KFGD500ESS 30 in. 5-Burner Gas Convection Slide-In Range has 8 other known error codes:

DOOR NOT CLOSING — Oven Door Not Closing Flush (2 fixes)
ELEMENT BURNED OUT — Bake or Broil Element Burned Out (Electric) (2 fixes)
F1E0 — EEPROM Communication Error (2 fixes)
F1E1 — EEPROM Checksum Error (2 fixes)
F1E2 — Safety Relay Test Failed (2 fixes)
F2E0 — Shorted Keypad / Touch Interface (2 fixes)
F2E1 — Keypad Cable Disconnected (2 fixes)
F2E5 — Cancel Key Shorted (2 fixes)

Which other KitchenAid models have the BURNER WON'T LIGHT error?

Error code BURNER WON'T LIGHT also appears on 2 other KitchenAid models:

KFEG500ESS 30 in. 5-Element Electric Convection Slide-In Range (oven) · 2 fixes
KOSE500ESS 30 in. Single Wall Oven with Even-Heat True Convection (oven) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx