👕Washer

F7E1

Kenmore · 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator

Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator F7E1 Error Fix: Motor Speed Sensing Fault

The motor's tachometer (Hall sensor) is not providing a signal. Check motor rotor position sensor (RPS) connection. Check stator wiring. Look for objects between basket and tub. Replace motor RPS or stator if defective.

High severity2 fixes available✨ Free fix available

Quick Answer

Error F7E1 on the Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator means: Motor Speed Sensing Fault. The top-ranked community fix is “Test and Replace Motor Rotor Position Sensor or Stator” (hard difficulty, ~90 min, DIY cost: $30-$60). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · washer

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many washer repairs can be done safely at home, consider hiring a qualified technician if:

This is a high severity error — continued use may cause damage or a safety hazard
The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $200-$300.

Other Kenmore Models with Error F7E1

665.14573 24 in. Front Control Built-In Dishwasher

dishwasher · 2 fixes

Other Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator Error Codes

AGITATOR DOGS WORN

Agitator Dogs Worn Out

2 fixes

Door/Lid Lock Error

2 fixes

DRIVE BELT WORN

Drive Belt Worn or Broken

Drum Bearing Failure

Stuck Key on Control Board

2 fixes

F0E2

Too Many Key Presses Detected

2 fixes

F0E5

Load Detected with Lid Open

2 fixes

F1E1

Water Temperature Sensor Error

2 fixes

People Also Ask About Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator Error F7E1

What does error code F7E1 mean on a Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator?

Error code F7E1 on the Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator means: Motor Speed Sensing Fault. The motor's tachometer (Hall sensor) is not providing a signal. Check motor rotor position sensor (RPS) connection. Check stator wiring. Look for objects between basket and tub. Replace motor RPS or stator if defective.

How do I fix error code F7E1 on my Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator?

The most successful fix is "Test and Replace Motor Rotor Position Sensor or Stator" (hard difficulty, ~90 minutes). Estimated DIY cost: $30-$60. HomeMD has 2 community-ranked fixes for this error.

Is error code F7E1 on a Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator serious?

This error is rated high severity. You should address it promptly — continued use could cause damage or safety concerns.

Can I fix Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator error F7E1 myself?

Yes — the top-ranked community fix ("Test and Replace Motor Rotor Position Sensor or Stator") is rated hard difficulty and takes about 90 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Flashlight.

How much does it cost to repair Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator error F7E1?

DIY cost: $30-$60. Professional repair typically costs $200-$300. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator have?

The Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator has 8 other known error codes, including: AGITATOR DOGS WORN (Agitator Dogs Worn Out), dL (Door/Lid Lock Error), DRIVE BELT WORN (Drive Belt Worn or Broken), DRUM BEARING FAIL (Drum Bearing Failure), F0E1 (Stuck Key on Control Board), and 3 more.

Which other Kenmore models have the F7E1 error?

Error code F7E1 also appears on 1 other Kenmore model: 665.14573 24 in. Front Control Built-In Dishwasher. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator have?

The Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator has 8 other known error codes:

AGITATOR DOGS WORN — Agitator Dogs Worn Out (2 fixes)
dL — Door/Lid Lock Error (2 fixes)
DRIVE BELT WORN — Drive Belt Worn or Broken (2 fixes)
DRUM BEARING FAIL — Drum Bearing Failure (2 fixes)
F0E1 — Stuck Key on Control Board (2 fixes)
F0E2 — Too Many Key Presses Detected (2 fixes)
F0E5 — Load Detected with Lid Open (2 fixes)
F1E1 — Water Temperature Sensor Error (2 fixes)

Which other Kenmore models have the F7E1 error?

Error code F7E1 also appears on 1 other Kenmore model:

665.14573 24 in. Front Control Built-In Dishwasher (dishwasher) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx