👕Washer

F1E1

Kenmore · 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator

Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator F1E1 Error Fix: Water Temperature Sensor Error

The water temperature thermistor is reading out of range. Check wire connections to NTC thermistor. Measure sensor resistance — approximately 50K ohms at 77°F. Replace sensor if out of range.

Medium severity2 fixes available✨ Free fix available

Quick Answer

Error F1E1 on the Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator means: Water Temperature Sensor Error. The top-ranked community fix is “Test and Replace Water Temperature Sensor” (medium difficulty, ~45 min, DIY cost: $15-$25). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · washer

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many washer repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $120-$180.

Other Kenmore Models with Error F1E1

665.14573 24 in. Front Control Built-In Dishwasher

dishwasher · 2 fixes

Other Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator Error Codes

AGITATOR DOGS WORN

Agitator Dogs Worn Out

2 fixes

Door/Lid Lock Error

2 fixes

DRIVE BELT WORN

Drive Belt Worn or Broken

Drum Bearing Failure

Stuck Key on Control Board

2 fixes

F0E2

Too Many Key Presses Detected

2 fixes

F0E5

Load Detected with Lid Open

2 fixes

F1E2

Motor Control Board Fault

2 fixes

People Also Ask About Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator Error F1E1

What does error code F1E1 mean on a Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator?

Error code F1E1 on the Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator means: Water Temperature Sensor Error. The water temperature thermistor is reading out of range. Check wire connections to NTC thermistor. Measure sensor resistance — approximately 50K ohms at 77°F. Replace sensor if out of range.

How do I fix error code F1E1 on my Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator?

The most successful fix is "Test and Replace Water Temperature Sensor" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

Is error code F1E1 on a Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator serious?

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Can I fix Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator error F1E1 myself?

Yes — the top-ranked community fix ("Test and Replace Water Temperature Sensor") is rated medium difficulty and takes about 45 minutes. Tools needed: Phillips screwdriver, Multimeter, Needle-nose pliers.

How much does it cost to repair Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator error F1E1?

DIY cost: $15-$25. Professional repair typically costs $120-$180. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator have?

The Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator has 8 other known error codes, including: AGITATOR DOGS WORN (Agitator Dogs Worn Out), dL (Door/Lid Lock Error), DRIVE BELT WORN (Drive Belt Worn or Broken), DRUM BEARING FAIL (Drum Bearing Failure), F0E1 (Stuck Key on Control Board), and 3 more.

Which other Kenmore models have the F1E1 error?

Error code F1E1 also appears on 1 other Kenmore model: 665.14573 24 in. Front Control Built-In Dishwasher. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator have?

The Kenmore 110.22352 Top-Load Washer 4.2 cu. ft. with Dual Action Agitator has 8 other known error codes:

AGITATOR DOGS WORN — Agitator Dogs Worn Out (2 fixes)
dL — Door/Lid Lock Error (2 fixes)
DRIVE BELT WORN — Drive Belt Worn or Broken (2 fixes)
DRUM BEARING FAIL — Drum Bearing Failure (2 fixes)
F0E1 — Stuck Key on Control Board (2 fixes)
F0E2 — Too Many Key Presses Detected (2 fixes)
F0E5 — Load Detected with Lid Open (2 fixes)
F1E2 — Motor Control Board Fault (2 fixes)

Which other Kenmore models have the F1E1 error?

Error code F1E1 also appears on 1 other Kenmore model:

665.14573 24 in. Front Control Built-In Dishwasher (dishwasher) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx