GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction FC Error Fix: Door Lock Wiring Problem

Error code FC on the GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction means: Door Lock Wiring Problem. Wiring fault between the ERC and door lock motor assembly — wires may be pinched between oven frame and control panel; inspect wiring harness for pinched, burned, or damaged insulation; check connectors at both ERC and lock motor

The most successful fix is "Repair or Replace Damaged Door Lock Wiring Harness" (medium difficulty, ~60 minutes). Estimated DIY cost: $10-$20. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Repair or Replace Damaged Door Lock Wiring Harness") is rated medium difficulty and takes about 60 minutes. Tools needed: T20 Torx screwdriver, Wire strippers, Multimeter, Soldering iron (optional).

DIY cost: $10-$20. Professional repair typically costs $140-$220. Many homeowners save money by trying the top-ranked community fix first.

The GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction has 8 other known error codes, including: F0 (Stuck Touch Pad Key), F1 (Electronic Oven Control (ERC) Failure), F131 (Coil Temperature Sensor Failure), F132 (IGBT Over-Temperature), F133 (Incompatible Cookware Detected), and 3 more.

Error code FC also appears on 6 other GE Profile models: PB935YPFS 30 in Slide-In Gas Range 22,000 BTU with True European Convection, PB960YPFS 6.7 cu ft Smart Slide-In Convection Electric, PGB935YPFS 6.7 cu ft Smart Slide-In Double Oven Gas, PGBS960YPFS 6.7 cu ft Smart Free-Standing Gas, PGS930SELSS 5.6 cu ft Smart Slide-In Gas Convection, PHS930YPFS 5.3 cu ft Smart Slide-In Induction. The fix may vary by model, so check each model's specific page for tailored repair steps.