🔥Oven / Range

F131

GE Profile · PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction

GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction F131 Error Fix: Coil Temperature Sensor Failure

An induction coil temperature sensor has an open or shorted circuit — the sensor monitors coil temperature for safety; the affected burner zone will not heat; sensor or wiring needs replacement

Medium severity2 fixes available✨ Free fix available

Quick Answer

Error F131 on the GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction means: Coil Temperature Sensor Failure. The top-ranked community fix is “Test and Replace the Coil Temperature Sensor” (medium difficulty, ~45 min, DIY cost: $15-$25). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · oven

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many oven repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $130-$180.

Other GE Profile Models with Error F131

PHS930YPFS 5.3 cu ft Smart Slide-In Induction

oven · 2 fixes

PIM36LSRSS 36 in Built-In All Freezer Column

cooktop · 2 fixes

PIR36LSRSS 36 in Built-In All Refrigerator Column

cooktop · 2 fixes

Other GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction Error Codes

Stuck Touch Pad Key

2 fixes

Electronic Oven Control (ERC) Failure

2 fixes

F132

IGBT Over-Temperature

2 fixes

F133

Incompatible Cookware Detected

2 fixes

F134

Coil Not Heating

2 fixes

Oven Over-Temperature Condition

2 fixes

Open Oven Temperature Sensor (RTD)

2 fixes

Shorted Oven Temperature Sensor

2 fixes

People Also Ask About GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction Error F131

What does error code F131 mean on a GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction?

Error code F131 on the GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction means: Coil Temperature Sensor Failure. An induction coil temperature sensor has an open or shorted circuit — the sensor monitors coil temperature for safety; the affected burner zone will not heat; sensor or wiring needs replacement

How do I fix error code F131 on my GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction?

The most successful fix is "Test and Replace the Coil Temperature Sensor" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

Is error code F131 on a GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction serious?

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Can I fix GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction error F131 myself?

Yes — the top-ranked community fix ("Test and Replace the Coil Temperature Sensor") is rated medium difficulty and takes about 45 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Needle-nose pliers.

How much does it cost to repair GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction error F131?

DIY cost: $15-$25. Professional repair typically costs $130-$180. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction have?

The GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction has 8 other known error codes, including: F0 (Stuck Touch Pad Key), F1 (Electronic Oven Control (ERC) Failure), F132 (IGBT Over-Temperature), F133 (Incompatible Cookware Detected), F134 (Coil Not Heating), and 3 more.

Which other GE Profile models have the F131 error?

Error code F131 also appears on 3 other GE Profile models: PHS930YPFS 5.3 cu ft Smart Slide-In Induction, PIM36LSRSS 36 in Built-In All Freezer Column, PIR36LSRSS 36 in Built-In All Refrigerator Column. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction have?

The GE Profile PSS93YPFS 6.7 cu ft Smart Slide-In Double Oven Induction has 8 other known error codes:

F0 — Stuck Touch Pad Key (2 fixes)
F1 — Electronic Oven Control (ERC) Failure (2 fixes)
F132 — IGBT Over-Temperature (2 fixes)
F133 — Incompatible Cookware Detected (2 fixes)
F134 — Coil Not Heating (2 fixes)
F2 — Oven Over-Temperature Condition (2 fixes)
F3 — Open Oven Temperature Sensor (RTD) (2 fixes)
F4 — Shorted Oven Temperature Sensor (2 fixes)

Which other GE Profile models have the F131 error?

Error code F131 also appears on 3 other GE Profile models:

PHS930YPFS 5.3 cu ft Smart Slide-In Induction (oven) · 2 fixes
PIM36LSRSS 36 in Built-In All Freezer Column (cooktop) · 2 fixes
PIR36LSRSS 36 in Built-In All Refrigerator Column (cooktop) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx