GE Profile PB960YPFS 6.7 cu ft Smart Slide-In Convection Electric F4 Error Fix: Shorted Oven Temperature Sensor

Error code F4 on the GE Profile PB960YPFS 6.7 cu ft Smart Slide-In Convection Electric means: Shorted Oven Temperature Sensor. The oven temperature sensor circuit is shorted — sensor wiring damaged or sensor failed with internally shorted element; test with multimeter (~1,080 ohms at room temp); if near zero ohms, sensor or wiring is shorted; inspect wires for insulation damage

The most successful fix is "Test and Replace Oven Temperature Sensor" (medium difficulty, ~40 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Test and Replace Oven Temperature Sensor") is rated medium difficulty and takes about 40 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Needle-nose pliers.

DIY cost: $15-$25. Professional repair typically costs $110-$170. Many homeowners save money by trying the top-ranked community fix first.

The GE Profile PB960YPFS 6.7 cu ft Smart Slide-In Convection Electric has 8 other known error codes, including: F0 (Stuck Touch Pad Key), F1 (Electronic Oven Control (ERC) Failure), F2 (Oven Over-Temperature Condition), F3 (Open Oven Temperature Sensor (RTD)), F5 (ERC Relay Drive Circuit Failure), and 3 more.

Error code F4 also appears on 12 other GE Profile models: PB935YPFS 30 in Slide-In Gas Range 22,000 BTU with True European Convection, PEB9159SJSS 1.5 cu ft Smart Countertop Convection, PES7227SLSS 2.2 cu ft Countertop Sensor Microwave, PGB935YPFS 6.7 cu ft Smart Slide-In Double Oven Gas, PGBS960YPFS 6.7 cu ft Smart Free-Standing Gas, PGS930SELSS 5.6 cu ft Smart Slide-In Gas Convection, and 6 more. The fix may vary by model, so check each model's specific page for tailored repair steps.