GE Profile PB960YPFS 6.7 cu ft Smart Slide-In Convection Electric F1 Error Fix: Electronic Oven Control (ERC) Failure

Error code F1 on the GE Profile PB960YPFS 6.7 cu ft Smart Slide-In Convection Electric means: Electronic Oven Control (ERC) Failure. The Electronic Range Control board has an internal failure — the control board circuitry has malfunctioned; try disconnecting power at the breaker for 30 seconds; if F1 returns, the ERC must be replaced

The most successful fix is "Replace the Electronic Range Control (ERC) Board" (hard difficulty, ~60 minutes). Estimated DIY cost: $100-$150. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace the Electronic Range Control (ERC) Board") is rated hard difficulty and takes about 60 minutes. Tools needed: Phillips screwdriver, Multimeter.

DIY cost: $100-$150. Professional repair typically costs $250-$350. Many homeowners save money by trying the top-ranked community fix first.

The GE Profile PB960YPFS 6.7 cu ft Smart Slide-In Convection Electric has 8 other known error codes, including: F0 (Stuck Touch Pad Key), F2 (Oven Over-Temperature Condition), F3 (Open Oven Temperature Sensor (RTD)), F4 (Shorted Oven Temperature Sensor), F5 (ERC Relay Drive Circuit Failure), and 3 more.

Error code F1 also appears on 12 other GE Profile models: PB935YPFS 30 in Slide-In Gas Range 22,000 BTU with True European Convection, PEB9159SJSS 1.5 cu ft Smart Countertop Convection, PES7227SLSS 2.2 cu ft Countertop Sensor Microwave, PGB935YPFS 6.7 cu ft Smart Slide-In Double Oven Gas, PGBS960YPFS 6.7 cu ft Smart Free-Standing Gas, PGS930SELSS 5.6 cu ft Smart Slide-In Gas Convection, and 6 more. The fix may vary by model, so check each model's specific page for tailored repair steps.