E61
Frigidaire · FCED4900HW 8.0 cu ft Electric Dryer with Quick Dry
The control board commanded the heater relay to close but does not detect current flow through the heater circuit. Test the heating element for continuity (should read 10-20 ohms). Check all thermal fuses and thermostats in the heater circuit. If the heating element and thermal devices test good, the control board heater relay has failed — replace the control board.
Error E61 on the Frigidaire FCED4900HW 8.0 cu ft Electric Dryer with Quick Dry means: Heater Relay Not Closing. The top-ranked community fix is “Test and Replace Heating Element, Thermal Fuses, or Control Board” (hard difficulty, ~60 min, DIY cost: $30-$60). 2 community-ranked fixes available below.
Published February 2026 · 2 fixes · dryer
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many dryer repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $200-$350.
dryer · 2 fixes
dryer · 2 fixes
dryer · 2 fixes
dryer · 2 fixes
dryer · 2 fixes
Inlet Thermistor Open or Shorted
Outlet Thermistor Open or Shorted
Door Switch Open — Door Not Closed
Motor Start Failure
Heater Relay Stuck On — FIRE HAZARD
Heating Element Open Circuit
Heater Relay Stuck — Multiple Trips
Stuck Heater Relay — Safety Shutdown
The Frigidaire FCED4900HW 8.0 cu ft Electric Dryer with Quick Dry has 8 other known error codes:
Error code E61 also appears on 5 other Frigidaire models:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx