Fisher & Paykel Fisher & Paykel DE4024P2 24-Inch 4.0 cu ft Condensing Electric Dryer with SmartTouch Controls NO-HEAT Error Fix: Dryer Not Heating

Error code NO-HEAT on the Fisher & Paykel Fisher & Paykel DE4024P2 24-Inch 4.0 cu ft Condensing Electric Dryer with SmartTouch Controls means: Dryer Not Heating. The dryer tumbles but produces no heat — check the lint filter and exhaust vent for blockage (the most common cause), verify the heating element has continuity, check the thermal fuse and high-limit thermostat, and for electric dryers ensure both legs of the 240V supply are working (a tripped breaker on one leg allows the motor but not the heater to run)

The most successful fix is "Test and Replace Heating Element and Thermal Fuse" (hard difficulty, ~60 minutes). Estimated DIY cost: $20-$40. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Test and Replace Heating Element and Thermal Fuse") is rated hard difficulty and takes about 60 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Needle-nose pliers.

DIY cost: $20-$40. Professional repair typically costs $150-$250. Many homeowners save money by trying the top-ranked community fix first.

The Fisher & Paykel Fisher & Paykel DE4024P2 24-Inch 4.0 cu ft Condensing Electric Dryer with SmartTouch Controls has 8 other known error codes, including: DRUM-NOISE (Squeaking or Thumping from Drum), E2 (Thermistor Fault (NTC Sensor)), E3 (Heater Element Open Circuit), E4 (Heater Element Short Circuit), E5 (Motor Fault), and 3 more.