Fisher & Paykel Fisher & Paykel DE4024P2 24-Inch 4.0 cu ft Condensing Electric Dryer with SmartTouch Controls FD1 Error Fix: High Limit Thermostat Tripped

Error code FD1 on the Fisher & Paykel Fisher & Paykel DE4024P2 24-Inch 4.0 cu ft Condensing Electric Dryer with SmartTouch Controls means: High Limit Thermostat Tripped. The high-limit safety thermostat has tripped due to excessive dryer temperature — this is usually caused by a blocked lint filter, a kinked or clogged exhaust duct, or a crushed duct behind the dryer; clean the lint filter, check the full exhaust path, and ensure the duct is not crushed against the wall; the thermostat may need manual reset or replacement

The most successful fix is "Reset or Replace the High Limit Thermostat" (medium difficulty, ~45 minutes). Estimated DIY cost: $5-$15. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Reset or Replace the High Limit Thermostat") is rated medium difficulty and takes about 45 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Needle-nose pliers.

DIY cost: $5-$15. Professional repair typically costs $130-$200. Many homeowners save money by trying the top-ranked community fix first.

The Fisher & Paykel Fisher & Paykel DE4024P2 24-Inch 4.0 cu ft Condensing Electric Dryer with SmartTouch Controls has 8 other known error codes, including: DRUM-NOISE (Squeaking or Thumping from Drum), E2 (Thermistor Fault (NTC Sensor)), E3 (Heater Element Open Circuit), E4 (Heater Element Short Circuit), E5 (Motor Fault), and 3 more.