E17
Bosch · WGG244ABUS 2.4 cu ft 500 Series Smart Washer
The water level has exceeded the maximum permitted level. The drain pump will activate to bring the level down. Check the water inlet valve for a stuck-open condition. Check the pressure sensor/switch and its air hose. If the inlet valve does not close when power is removed, replace it immediately. This is a safety fault — the washer will not operate until the water level is brought to a safe range.
Error E17 on the Bosch WGG244ABUS 2.4 cu ft 500 Series Smart Washer means: Overfill Condition. The top-ranked community fix is “Inspect and Replace Pressure Sensor and Air Hose” (medium difficulty, ~60 min, DIY cost: $15-$25). 2 community-ranked fixes available below.
Published February 2026 · 2 fixes · washer
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many washer repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $180-$250.
dishwasher · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
dishwasher · 2 fixes
washer · 2 fixes
washer · 2 fixes
washer · 2 fixes
washer · 2 fixes
The Bosch WGG244ABUS 2.4 cu ft 500 Series Smart Washer has 8 other known error codes:
Error code E17 also appears on 16 other Bosch models:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx