Bosch HGS8655UC 800 Series 36 in Gas Cooktop Click No Ignite Error Fix: Igniters Click But No Flame

Error code Click No Ignite on the Bosch HGS8655UC 800 Series 36 in Gas Cooktop means: Igniters Click But No Flame. The spark igniter clicks continuously but the burner does not light. The spark is present but gas may not be flowing, or the spark is not reaching the gas stream. Check that the burner cap and burner head are properly aligned and seated. Clean the igniter electrode — a buildup of grease or carbon can prevent a strong spark. Ensure the gas supply valve is fully open. Check the burner orifice for clogs (use a needle to clear the small gas port). If only one burner is affected, the burner valve may be faulty. On LP (propane) installations, check the tank level.

The most successful fix is "Replace Faulty Burner Valve or Check Gas Line" (hard difficulty, ~60 minutes). Estimated DIY cost: $10-$20. HomeMD has 2 community-ranked fixes for this error.

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Yes — the top-ranked community fix ("Replace Faulty Burner Valve or Check Gas Line") is rated hard difficulty and takes about 60 minutes. Tools needed: T20 Torx screwdriver, Multimeter, Adjustable wrench, Pipe thread sealant.

DIY cost: $10-$20. Professional repair typically costs $150-$250. Many homeowners save money by trying the top-ranked community fix first.

The Bosch HGS8655UC 800 Series 36 in Gas Cooktop has 5 other known error codes, including: Continuous Click (Igniters Click Continuously When Off), Gas Smell (Gas Odor Without Burner On), Uneven Flame (Uneven or Yellow/Orange Flame), Weak Flame (Low or Weak Burner Flame), Won't Ignite (Burner Will Not Ignite).

Error code Click No Ignite also appears on 1 other Bosch model: HGS8045UC 800 Series 30 in 5-Burner Gas Cooktop. The fix may vary by model, so check each model's specific page for tailored repair steps.