E015
Bosch · HGI8056UC 800 Series 30 in Gas Slide-In Range
The oven door lock mechanism has failed during a self-clean cycle. The lock motor did not engage or the lock switch did not confirm the locked or unlocked position. Do not force the door if locked. Disconnect power and wait for the oven to cool completely before attempting to open the door manually. Check the lock motor and lock switch for proper operation. Check the wire harness to the lock assembly. Replace the door lock motor/switch assembly if defective.
Error E015 on the Bosch HGI8056UC 800 Series 30 in Gas Slide-In Range means: Door Lock Fault — Self-Clean. The top-ranked community fix is “Replace Oven Door Lock Motor and Switch Assembly” (medium difficulty, ~45 min, DIY cost: $25-$40). 2 community-ranked fixes available below.
Published February 2026 · 2 fixes · oven
Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.
While many oven repairs can be done safely at home, consider hiring a qualified technician if:
Average professional repair cost for this issue: $150-$220.
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
oven · 2 fixes
Oven Temperature Sensor Open
Oven Temperature Sensor Shorted
Oven Maximum Temperature Exceeded
Door Lock Timeout
Gas Igniter Failure — Bake
Gas Igniter Failure — Broil
Gas Valve / Supply Fault
Control Board Communication Error
The Bosch HGI8056UC 800 Series 30 in Gas Slide-In Range has 8 other known error codes:
Error code E015 also appears on 9 other Bosch models:
Ad Space — banner
Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx