🍽️Dishwasher

Start Blinking

Amana · ADB1700ADS Tall Tub DW

Amana ADB1700ADS Tall Tub DW Start Blinking Error Fix: Start Light Blinking — Door Open

The Start/Resume light is blinking, indicating the door was opened during a cycle or is not properly closed. Close the door firmly until you hear the latch click. Press Start/Resume to continue the interrupted cycle. If the light continues blinking with the door closed, the door switch or latch assembly may be faulty. Check that the door gasket is not preventing the door from fully closing.

Low severity2 fixes available✨ Free fix available

Quick Answer

Error Start Blinking on the Amana ADB1700ADS Tall Tub DW means: Start Light Blinking — Door Open. The top-ranked community fix is “Test and Replace Door Switch or Latch Assembly” (medium difficulty, ~45 min, DIY cost: $15-$25). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · dishwasher

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many dishwasher repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $120-$180.

Other Amana Models with Error Start Blinking

ADB1400AGS 24 in Front Control Dishwasher 50 dBA Quiet Wash Cycle

dishwasher · 2 fixes

Other Amana ADB1700ADS Tall Tub DW Error Codes

1-Blink

Clean Light 1 Blink — Door Not Latched

2 fixes

2-Blink

Clean Light 2 Blinks — Drain Issue

2 fixes

3-Blink

Clean Light 3 Blinks — Water Temperature Issue

2 fixes

4-Blink

Clean Light 4 Blinks — Water Fill Error

2 fixes

7-Blink

Clean Light 7 Blinks — Sensor or Flow Error

2 fixes

8-Blink

Clean Light 8 Blinks — Drain Motor Issue

2 fixes

Clean+Start Flash

Clean and Start Lights Flashing Together — Control Reset Needed

2 fixes

People Also Ask About Amana ADB1700ADS Tall Tub DW Error Start Blinking

What does error code Start Blinking mean on a Amana ADB1700ADS Tall Tub DW?

Error code Start Blinking on the Amana ADB1700ADS Tall Tub DW means: Start Light Blinking — Door Open. The Start/Resume light is blinking, indicating the door was opened during a cycle or is not properly closed. Close the door firmly until you hear the latch click. Press Start/Resume to continue the interrupted cycle. If the light continues blinking with the door closed, the door switch or latch assembly may be faulty. Check that the door gasket is not preventing the door from fully closing.

How do I fix error code Start Blinking on my Amana ADB1700ADS Tall Tub DW?

The most successful fix is "Test and Replace Door Switch or Latch Assembly" (medium difficulty, ~45 minutes). Estimated DIY cost: $15-$25. HomeMD has 2 community-ranked fixes for this error.

Is error code Start Blinking on a Amana ADB1700ADS Tall Tub DW serious?

This error is rated low severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Can I fix Amana ADB1700ADS Tall Tub DW error Start Blinking myself?

Yes — the top-ranked community fix ("Test and Replace Door Switch or Latch Assembly") is rated medium difficulty and takes about 45 minutes. Tools needed: Phillips screwdriver, Multimeter.

How much does it cost to repair Amana ADB1700ADS Tall Tub DW error Start Blinking?

DIY cost: $15-$25. Professional repair typically costs $120-$180. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Amana ADB1700ADS Tall Tub DW have?

The Amana ADB1700ADS Tall Tub DW has 7 other known error codes, including: 1-Blink (Clean Light 1 Blink — Door Not Latched), 2-Blink (Clean Light 2 Blinks — Drain Issue), 3-Blink (Clean Light 3 Blinks — Water Temperature Issue), 4-Blink (Clean Light 4 Blinks — Water Fill Error), 7-Blink (Clean Light 7 Blinks — Sensor or Flow Error), and 2 more.

Which other Amana models have the Start Blinking error?

Error code Start Blinking also appears on 1 other Amana model: ADB1400AGS 24 in Front Control Dishwasher 50 dBA Quiet Wash Cycle. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the Amana ADB1700ADS Tall Tub DW have?

The Amana ADB1700ADS Tall Tub DW has 7 other known error codes:

1-Blink — Clean Light 1 Blink — Door Not Latched (2 fixes)
2-Blink — Clean Light 2 Blinks — Drain Issue (2 fixes)
3-Blink — Clean Light 3 Blinks — Water Temperature Issue (2 fixes)
4-Blink — Clean Light 4 Blinks — Water Fill Error (2 fixes)
7-Blink — Clean Light 7 Blinks — Sensor or Flow Error (2 fixes)
8-Blink — Clean Light 8 Blinks — Drain Motor Issue (2 fixes)
Clean+Start Flash — Clean and Start Lights Flashing Together — Control Reset Needed (2 fixes)

Which other Amana models have the Start Blinking error?

Error code Start Blinking also appears on 1 other Amana model:

ADB1400AGS 24 in Front Control Dishwasher 50 dBA Quiet Wash Cycle (dishwasher) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx