🍽️Dishwasher

3-Blink

Amana · ADB1700ADS Tall Tub DW

Amana ADB1700ADS Tall Tub DW 3-Blink Error Fix: Clean Light 3 Blinks — Water Temperature Issue

The Clean indicator light blinks 3 times, pauses, and repeats. The water entering the dishwasher is not reaching the required temperature, or the heating element is not maintaining temperature during the cycle. Verify your home water heater is set to at least 120°F. Run hot water at the kitchen sink before starting the dishwasher to ensure hot water reaches the appliance immediately. Check the heating element in the bottom of the tub for visible breaks or damage. Test the heating element with a multimeter — it should read 15-30 ohms. If open (infinite resistance), the element must be replaced.

Medium severity2 fixes available✨ Free fix available

Quick Answer

Error 3-Blink on the Amana ADB1700ADS Tall Tub DW means: Clean Light 3 Blinks — Water Temperature Issue. The top-ranked community fix is “Test and Replace Heating Element” (medium difficulty, ~45 min, DIY cost: $20-$30). 2 community-ranked fixes available below.

Published February 2026 · 2 fixes · dishwasher

Content is based on manufacturer service documentation, community repair experience, and OEM technical bulletins. Always verify with your owner's manual.Learn about our editorial standards.

When to Call a Professional

While many dishwasher repairs can be done safely at home, consider hiring a qualified technician if:

The repair involves electrical wiring, gas lines, or refrigerant
You've tried the top-ranked fix and the error persists
You smell gas, see sparking, or notice water leaking
The repair requires specialized tools you don't have
Your appliance is still under manufacturer warranty

Average professional repair cost for this issue: $130-$190.

Other Amana Models with Error 3-Blink

ADB1400AGS 24 in Front Control Dishwasher 50 dBA Quiet Wash Cycle

dishwasher · 2 fixes

Other Amana ADB1700ADS Tall Tub DW Error Codes

1-Blink

Clean Light 1 Blink — Door Not Latched

2 fixes

2-Blink

Clean Light 2 Blinks — Drain Issue

2 fixes

4-Blink

Clean Light 4 Blinks — Water Fill Error

2 fixes

7-Blink

Clean Light 7 Blinks — Sensor or Flow Error

2 fixes

8-Blink

Clean Light 8 Blinks — Drain Motor Issue

2 fixes

Clean+Start Flash

Clean and Start Lights Flashing Together — Control Reset Needed

2 fixes

Start Blinking

Start Light Blinking — Door Open

2 fixes

People Also Ask About Amana ADB1700ADS Tall Tub DW Error 3-Blink

What does error code 3-Blink mean on a Amana ADB1700ADS Tall Tub DW?

Error code 3-Blink on the Amana ADB1700ADS Tall Tub DW means: Clean Light 3 Blinks — Water Temperature Issue. The Clean indicator light blinks 3 times, pauses, and repeats. The water entering the dishwasher is not reaching the required temperature, or the heating element is not maintaining temperature during the cycle. Verify your home water heater is set to at least 120°F. Run hot water at the kitchen sink before starting the dishwasher to ensure hot water reaches the appliance immediately. Check the heating element in the bottom of the tub for visible breaks or damage. Test the heating element with a multimeter — it should read 15-30 ohms. If open (infinite resistance), the element must be replaced.

How do I fix error code 3-Blink on my Amana ADB1700ADS Tall Tub DW?

The most successful fix is "Test and Replace Heating Element" (medium difficulty, ~45 minutes). Estimated DIY cost: $20-$30. HomeMD has 2 community-ranked fixes for this error.

Is error code 3-Blink on a Amana ADB1700ADS Tall Tub DW serious?

This error is rated medium severity. It should be addressed soon, but your appliance may still function in a limited capacity.

Can I fix Amana ADB1700ADS Tall Tub DW error 3-Blink myself?

Yes — the top-ranked community fix ("Test and Replace Heating Element") is rated medium difficulty and takes about 45 minutes. Tools needed: Phillips screwdriver, Multimeter, Nut driver set.

How much does it cost to repair Amana ADB1700ADS Tall Tub DW error 3-Blink?

DIY cost: $20-$30. Professional repair typically costs $130-$190. Many homeowners save money by trying the top-ranked community fix first.

What other error codes does the Amana ADB1700ADS Tall Tub DW have?

The Amana ADB1700ADS Tall Tub DW has 7 other known error codes, including: 1-Blink (Clean Light 1 Blink — Door Not Latched), 2-Blink (Clean Light 2 Blinks — Drain Issue), 4-Blink (Clean Light 4 Blinks — Water Fill Error), 7-Blink (Clean Light 7 Blinks — Sensor or Flow Error), 8-Blink (Clean Light 8 Blinks — Drain Motor Issue), and 2 more.

Which other Amana models have the 3-Blink error?

Error code 3-Blink also appears on 1 other Amana model: ADB1400AGS 24 in Front Control Dishwasher 50 dBA Quiet Wash Cycle. The fix may vary by model, so check each model's specific page for tailored repair steps.

What other error codes does the Amana ADB1700ADS Tall Tub DW have?

The Amana ADB1700ADS Tall Tub DW has 7 other known error codes:

1-Blink — Clean Light 1 Blink — Door Not Latched (2 fixes)
2-Blink — Clean Light 2 Blinks — Drain Issue (2 fixes)
4-Blink — Clean Light 4 Blinks — Water Fill Error (2 fixes)
7-Blink — Clean Light 7 Blinks — Sensor or Flow Error (2 fixes)
8-Blink — Clean Light 8 Blinks — Drain Motor Issue (2 fixes)
Clean+Start Flash — Clean and Start Lights Flashing Together — Control Reset Needed (2 fixes)
Start Blinking — Start Light Blinking — Door Open (2 fixes)

Which other Amana models have the 3-Blink error?

Error code 3-Blink also appears on 1 other Amana model:

ADB1400AGS 24 in Front Control Dishwasher 50 dBA Quiet Wash Cycle (dishwasher) · 2 fixes

Ad Space — banner

Replace ADSENSE_PUBLISHER_ID in AdUnit.tsx