Amana ADB1400AGS 24 in Front Control Dishwasher 50 dBA Quiet Wash Cycle 8-Blink Error Fix: Clean Light 8 Blinks — Drain Motor Issue

Error code 8-Blink on the Amana ADB1400AGS 24 in Front Control Dishwasher 50 dBA Quiet Wash Cycle means: Clean Light 8 Blinks — Drain Motor Issue. The Clean indicator light blinks 8 times, pauses, and repeats. The drain motor/pump has a fault. The drain pump motor may have an open winding, seized impeller, or wiring fault. Check the drain pump wiring connections. Remove the filters and sump cover to access the pump impeller — clear any obstructions. Test the pump motor with a multimeter for continuity. If the pump has no continuity or is mechanically seized, replace the drain pump assembly.

The most successful fix is "Test and Replace Drain Pump Motor Assembly" (hard difficulty, ~60 minutes). Estimated DIY cost: $30-$50. HomeMD has 2 community-ranked fixes for this error.

This error is rated high severity. You should address it promptly — continued use could cause damage or safety concerns.

Yes — the top-ranked community fix ("Test and Replace Drain Pump Motor Assembly") is rated hard difficulty and takes about 60 minutes. Tools needed: Phillips screwdriver, Multimeter, Pliers, Bucket or towels.

DIY cost: $30-$50. Professional repair typically costs $150-$250. Many homeowners save money by trying the top-ranked community fix first.

The Amana ADB1400AGS 24 in Front Control Dishwasher 50 dBA Quiet Wash Cycle has 7 other known error codes, including: 1-Blink (Clean Light 1 Blink — Door Not Latched), 2-Blink (Clean Light 2 Blinks — Drain Issue), 3-Blink (Clean Light 3 Blinks — Water Temperature Issue), 4-Blink (Clean Light 4 Blinks — Water Fill Error), 7-Blink (Clean Light 7 Blinks — Sensor or Flow Error), and 2 more.

Error code 8-Blink also appears on 1 other Amana model: ADB1700ADS Tall Tub DW. The fix may vary by model, so check each model's specific page for tailored repair steps.