Admiral A3510PPW 30 in 5.0 cu ft Electric Range with Self-Clean Oven and Storage Drawer F8 Error Fix: Analog-to-Digital Converter Failure

Error code F8 on the Admiral A3510PPW 30 in 5.0 cu ft Electric Range with Self-Clean Oven and Storage Drawer means: Analog-to-Digital Converter Failure. The ERC has detected an Analog/Digital (A/D) processing failure. The control board's analog-to-digital converter, which reads the oven temperature sensor values, is not functioning correctly. This is an internal board failure. Try resetting power for 2 minutes. If the code returns, the Electronic Range Control must be replaced. This code is less common than F1 or F2 and almost always indicates a failed control board rather than a sensor or wiring issue.

The most successful fix is "Replace the Electronic Range Control Board" (hard difficulty, ~60 minutes). Estimated DIY cost: $20-$40. HomeMD has 2 community-ranked fixes for this error.

This error is rated high severity. You should address it promptly — continued use could cause damage or safety concerns.

Yes — the top-ranked community fix ("Replace the Electronic Range Control Board") is rated hard difficulty and takes about 60 minutes. Tools needed: Phillips screwdriver, Multimeter.

DIY cost: $20-$40. Professional repair typically costs $200-$300. Many homeowners save money by trying the top-ranked community fix first.

The Admiral A3510PPW 30 in 5.0 cu ft Electric Range with Self-Clean Oven and Storage Drawer has 8 other known error codes, including: F0 (Control Board Failure), F1 (Defective ERC or Touch Pad), F2 (Oven Over-Temperature), F3 (Oven Temperature Sensor Open Circuit), F4 (Oven Temperature Sensor Shorted), and 3 more.