Admiral A3510PPW 30 in 5.0 cu ft Electric Range with Self-Clean Oven and Storage Drawer F2 Error Fix: Oven Over-Temperature

Error code F2 on the Admiral A3510PPW 30 in 5.0 cu ft Electric Range with Self-Clean Oven and Storage Drawer means: Oven Over-Temperature. The oven temperature has exceeded the safe maximum limit (typically 600°F–650°F during bake, or 900°F+ during self-clean). The oven control has shut off the heating elements as a safety measure. This can be caused by a faulty oven temperature sensor (RTD), a shorted sensor wiring harness, a stuck-closed relay on the control board, or a defective ERC that is not cycling the bake/broil elements off properly. Check the oven temperature sensor resistance — it should read approximately 1080 ohms at room temperature (70°F). Inspect the sensor wiring for shorts. Check the relay board for welded relay contacts. Replace the sensor, relay board, or ERC as needed.

The most successful fix is "Replace Oven Temperature Sensor or Control Board Relay" (hard difficulty, ~60 minutes). Estimated DIY cost: $25-$50. HomeMD has 2 community-ranked fixes for this error.

This error is rated critical severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Yes — the top-ranked community fix ("Replace Oven Temperature Sensor or Control Board Relay") is rated hard difficulty and takes about 60 minutes. Tools needed: T15 Torx screwdriver, Phillips screwdriver, Multimeter.

DIY cost: $25-$50. Professional repair typically costs $180-$300. Many homeowners save money by trying the top-ranked community fix first.

The Admiral A3510PPW 30 in 5.0 cu ft Electric Range with Self-Clean Oven and Storage Drawer has 8 other known error codes, including: F0 (Control Board Failure), F1 (Defective ERC or Touch Pad), F3 (Oven Temperature Sensor Open Circuit), F4 (Oven Temperature Sensor Shorted), F5 (Control Board Watchdog Failure), and 3 more.