Whirlpool Whirlpool WTW5000DW 4.3 cu. ft. Top Load Washer F9E1 Error Fix: Drain Pump Error — Long Drain

Error code F9E1 on the Whirlpool Whirlpool WTW5000DW 4.3 cu. ft. Top Load Washer means: Drain Pump Error — Long Drain. The washer could not drain the water within the allotted time (typically 8-12 minutes). Check the drain pump filter — on Whirlpool front-load washers, the filter access is behind the small panel at the front bottom of the machine. Place towels down and slowly open the filter cap (water will pour out). Remove any coins, hair pins, socks, or debris. Check the drain hose for kinks. If the filter is clear, the drain pump motor may have failed — listen for humming or silence during drain. Replace the drain pump if it does not run.

The most successful fix is "Test and Replace the Drain Pump Motor" (medium difficulty, ~60 minutes). Estimated DIY cost: $10-$20. HomeMD has 2 community-ranked fixes for this error.

This error is rated warning severity. It is generally not urgent and can often be resolved with a simple DIY fix.

Yes — the top-ranked community fix ("Test and Replace the Drain Pump Motor") is rated medium difficulty and takes about 60 minutes. Tools needed: Phillips screwdriver, Multimeter, Pliers.

DIY cost: $10-$20. Professional repair typically costs $150-$220. Many homeowners save money by trying the top-ranked community fix first.

The Whirlpool Whirlpool WTW5000DW 4.3 cu. ft. Top Load Washer has 8 other known error codes, including: F0E1 (Load Detected During Clean Cycle), F0E2 (Excessive Suds Detected), F0E5 (Unbalanced Load), F2E1 (Stuck Button on Control Panel), F2E3 (User Interface Board Failure), and 3 more.

Error code F9E1 also appears on 4 other Whirlpool models: Whirlpool WDT750SAKZ 24 in. Top Control Dishwasher, Whirlpool WDTA50SAKZ 47 dBA Top Control Dishwasher with 3rd Rack, Whirlpool WFW72HEDW Duet Front Load Washer, Whirlpool WFW9620HW 4.5 cu. ft. Smart Front Load Washer. The fix may vary by model, so check each model's specific page for tailored repair steps.